Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - yozzer74

Pages: [1] 2 3 ... 5
1
CB750 / F2 rear shocks
« on: April 12, 2021, 09:13:35 AM »
Morning ive bought a f2 over the weekend its been messed around with.Seems really low to me ive measured shock length which are 330mm is that correct size if so what length could I go to cheers

2
CB350/400 / 400 four rear mudguard
« on: October 30, 2020, 09:44:29 AM »
Hi were would be best place to buy rear mudguard please

3
CB350/400 / No spark
« on: April 11, 2020, 08:02:19 PM »
Hello been a while I've bought myself a 400/400 needs plenty of work doing to it.engine turns over on start button but it as no spark. I've run a wire from battery to the coils to power them which then gives me a spark all be it a tiny one. Does anyone have any ideas what the problem could be. I've also done a compression test on it I'm getting 100 psi across all 4 cylinder.  My gauge is only a cheap thing off ebay so not too sure how accurate it will be. But should it run with that much compression?? Thanks in advance.

4
Other Bikes / New bike 😁
« on: October 23, 2018, 09:30:42 PM »
Got myself a new bike yesterday very impressed with her [ Guests cannot view attachments ]

5
Misc / Open / Bike show leeds
« on: July 21, 2018, 08:06:44 PM »
Hi bike show in Leeds next weekend custom bikes [ Guests cannot view attachments ]

6
Other Bikes / Cbx750
« on: July 02, 2018, 07:50:09 PM »
Hi thinking of buying a cbx750 does anyone know if they were a good engine .or not ?? The bike has got 45000 on clock .Thanks yozzer

7
Other Bikes / Gs550 running bad
« on: June 20, 2018, 08:33:01 PM »
Hi long shot this question. My gs550 is running really bad I've fitted k&n pod filters custom 4 into 2 pipe .Bike as c.v carbs dyno jet stage 3 kit fitted .problem is bike ticks over nice first part of throttle is good .When stood revs all way to red line .but when under load doesn't want to rev and pops and bangs bogs down .I've tried lifting needles up bigger main jets but makes no difference at all.im thinking it could be a timing issues. Anyone got any ideas I'm a little stuck .Cheers yozzzer 

8
CB750 / Inline fuel filters
« on: June 02, 2018, 09:19:10 PM »
Hi can anyone  recommend  a decent  inline fuel filter. With a good flow rate that's not too big.cheers

9
Other Bikes / Carb bling
« on: May 14, 2018, 08:04:00 PM »
Got my carbs back for GS .done by Harper's top job again .

10
Other Bikes / Bleeding breaks
« on: May 12, 2018, 04:19:40 PM »
Hi looking for some help been trying to bleed my breaks on GS I'm building .but can't get the leaver to firm up .it's got new break lines rebuilt calipers also using a front master cylinder from a gsxr 1000.could this be the issue?? There's no more air coming out of calipers now . [ Guests cannot view attachments ]

11
CB750 / Tapping nosie
« on: April 28, 2018, 03:31:38 PM »
My mates just got his bike running after rebuild.does the tapping noise sound ok .we regapped tappits again so there ok .https://youtu.be/xjeSlNsPSN0

12
Other Bikes / Gs550 scrambler build
« on: February 09, 2018, 09:24:46 PM »
Hi guys thought I would share this here .if anyone's interested. It's my latest build I'm making gs 550 into a scrambler http://www.dotheton.com/forum/index.php?topic=71129.msg835409#msg835409

13
CB350/400 / Engine rebuild cost 400
« on: October 01, 2017, 09:27:05 PM »
Bit of a random question.what sort of cost are you looking at for a total engine rebuild on 400four . chains seals shells ect.

14
CB750 / What model they off
« on: September 28, 2017, 09:43:45 PM »
Hi can anyone identify these forks calipers bike is a f1 but I don't think front end is

15
Misc / Open / Bike lift
« on: September 10, 2017, 09:58:38 PM »
Hi thinking of buying a bike lift does anyone have any recommendations  for a good one thanks .

Pages: [1] 2 3 ... 5
SimplePortal 2.3.5 © 2008-2012, SimplePortal