Honda-SOHC

Been on to nrc they were very helpfull and sounded chuffed that they were recomended, the gaffer also told me to raise my float level and that would effetively? (spelling) do the same as one size bigger pilots. ive bit the bullet and ordered some 45's from canada! will post results as they come in. ta flc.

As the title says, Ive bought some later type carbs and the bike feels weak at part throttle,
so Ive been trying to source some larger pilot jets.
it turns out they are push ins.
allens don't stock them and David silvers say they cant find anything either, can anyone help?
the bike is currently fitted with #42 and i would like to try #45/#48. are there drills that small?
any help much appreciated.
Ta FLC.

welcome......  and not to far away 

were are you rigwit?

Hi folks found this site from usa one,
just bought a 550k on a p plate with a few problems,
hope you guys can offer some help.
i just won some carbs on ebay they are the later type (3 screws to hold the float bowls on) mine were the 4 bolt older type,
the carbs fit fine but the throttle cables seam way too short?
the bike runs fine other than this, does anyone have a pic of how the cables run.
or part numbers are they different they need to be about 30mm longer.
thanks in advance Flc.