Honda-SOHC
SOHC.co.uk Forums => CB350/400 => Topic started by: petermigreen on June 04, 2016, 02:58:25 PM
-
Can anybody advise me on a source for bronze swing arm bushes for the 400/4 - Don't fancy replacing the plastic ones :( :-\
Thanks, Peter
-
Hello there, for example Ebay number:151631894025
Regards.
-
Found them thanks.
-
Haven't had much luck with bronze bushings. Confirm the collar is round, because of the poor lubing system they tend to wear to an ovalish shape. A new bushing won't fix this, and the collars are unobtanium. Getting the composite sleeves out is usually a total bugger of a job, good luck! Slitting the inside with a hacksaw blade is normal. The new bushing should be somewhat snug on the collar. It should be a tight press fit into the swingarm. It will be compressed a bit when pressed in and the collar fit get a bit tighter.
There is a fellow in the USA that services swingarms, either he makes new collars or grinds them round when worn out-of-round. Then he makes bronze bushings to fit the collar. Maybe not economical to ship a swingarm to/from the USA?
-
Not from the U.K. that's for sure, and chances are we'd get stung for import duty when it arrived back in the U.K.
-
Not from the U.K. that's for sure, and chances are we'd get stung for import duty when it arrived back in the U.K.
I have been lucky so far,ordered a fair amount of RD125 bits from the US,and far east,nothing mega expensive,about £80 an item,
and so far,no customs or Parcelforce charges,I did use Ebay international shipping,
as soon as I can into the garage,a few pics will be posted
-
E bay international shipping includes any customs dues, paid at the time of purchase, you've paid duty via e bay, but you avoid getting stung by parcel farce for their collection fee!
Sent from my X6pro using Tapatalk