Honda-SOHC

SOHC.co.uk Forums => CB750 => Topic started by: cb750stu on October 20, 2013, 04:17:28 PM

Title: Carb Question ??
Post by: cb750stu on October 20, 2013, 04:17:28 PM

Hi Folks I was wondering is there a specific measurement for the gap between the slider when it bottoms out in the body of the carb ?? I found this pic on a website but there is no measurement stated ??

Cheers Stu.

(http://i229.photobucket.com/albums/ee112/ktm_690/Capture_zps3f138d5c.png) (http://s229.photobucket.com/user/ktm_690/media/Capture_zps3f138d5c.png.html)

Title: Re: Carb Question ??
Post by: SteveD CB500K0 on October 20, 2013, 05:03:17 PM

I use a good old-fashioned 1/8" drill bit.

That wire looks too thin to me.

Title: Re: Carb Question ??
Post by: mick on October 20, 2013, 05:22:56 PM

I also use a 1/8th drill bit  ;) cheers Mick.

Title: Re: Carb Question ??
Post by: steff750 on October 20, 2013, 07:02:31 PM

 ;) OK as a static guide or bench rebuild you will still need to use gauges to sync the carbs once the bike is up and running happy days

Title: Re: Carb Question ??
Post by: cb750stu on October 20, 2013, 07:18:02 PM

Cheers Guys,