Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - cb750stu

Pages: [1] 2 3 4
1
Project Board / 76 750 F1SS finally finished !!
« on: July 02, 2018, 06:44:49 PM »
Hi folks just some pics of my finally finished (only took 4 years ) 76 750 F1 SS

Regards Stuart



Sent from my Pixel XL using Tapatalk


2
Other Bikes / New bike !!!
« on: April 08, 2014, 12:32:58 PM »
Hi Folks just thought I would post a pic of my new addition its a 93 YZF750R in the cocktail colours, its pretty much mint and only has 12500 genuine miles and the best thing it is totally standard which is the way it will remain, cheers


3
CB750 / Rear lighting Question ??
« on: January 27, 2014, 07:49:40 AM »
Hi Folks just wondering about my rear light,

Ive bought one of those Millar Stop lights it has a green and a black wire that's all,

My loom has a brown, green and a green/yellow for my back light,

I suppose my question is what wires do I use from my loom to the black green on my light,

Not having much luck with the wiring at the moment wired everything up yesterday and all that worked was the back light couldn't get the brake light to work though ??

Cheers

Stu

4
Misc / Open / Chain breaker Rivet tool ??
« on: January 22, 2014, 07:47:37 AM »
Hi Folks,

Just wondering if anyone can recommend a good chain tool there are loads out there but most of the ones look like they would break just by looking at them !!!

Also I'm after a good spark plug socket it took me ages last night to change 4 plugs on my 76 750 F1,

Cheers,

Stuart

5
CB750 / Carb Question ??
« on: October 20, 2013, 04:17:28 PM »
Hi Folks I was wondering is there a specific measurement for the gap between the slider when it bottoms out in the body of the carb ?? I found this pic on a website but there is no measurement stated ??

Cheers Stu.


6
CB750 / Battery hook up ??
« on: October 09, 2013, 07:28:20 AM »
Hi Folks,
CB750 F1.
Just a few questions about hooking up my battery if you dont mind ??
Am i right in saying that the

the battery cable from the engine goes to the starter solenoid which side the solenoid is not marked ??
Then the short battery cable (positive) which connects to the loom goes to the other connection on solenoid ??
Then the frame ground goes to the negitive on the battery ??

What goes onto the positive on the battery ??

Cheers    Stuart

7
CB750 / carb jets ??
« on: October 05, 2013, 01:26:42 PM »
Hi folks just wondering where the best place to get jets for my 76 f1 I'm after sizes

O 125 & 130 I can't seem to find them  on DS ??

Even better anyone know the part numbers for the above ???

Cheers
Stuart

8
CB750 / VIN Plate Info ??
« on: September 24, 2013, 12:47:18 PM »
Hi Folks just wondering if anyone could tell me the info i need to stamp in the highlighted boxes i have lost my original plate and need to get my new one stamped up,its for my 76 750 F1 Supersport,

Cheers

9
CB750 / Kickstart issues ??
« on: September 24, 2013, 07:13:15 AM »
Hi Folks found out last night that my kickstart will hit my new rearsets when i try and kick her over doh !!!!

Anybody know of a smaller kickstart that i might be able to use and fit the 750 ??

I have read some posts about people heating them up then bending them to shape to curl around the rearsets !!!

Cheers Stuart

10
CB750 / Ive been busy today !!!
« on: September 21, 2013, 09:58:53 PM »
Hi Folks just thought i would post some pics of my build progress !!

The frame went in no problem using the lower the frame down over with the engine on its side method !!!
Swingarm wasnt easy its a tight fit my 5 year old son helped me !!!
Carbs went on quite easily with the help of a smear of Fairy liquid  and new carb rubbers!!!

I know it looks like thers not much room between the top of wheel and frame but its resessed underneath i have 4.5 " to play with and the suspension is pretty stiff lol

Couple of questions if you dont mind ??

Am i best to fit the front calipers before the wheel or vice versa ??
When i tried to fit the front wheel there is still play from side to side does the hex part of the spindle nut go to the outside or inside ??


Anyway ill keep posting pics of my build !!

Cheers    Stuart






11
CB750 / Engine ready to go back in frame ??
« on: September 20, 2013, 08:21:06 PM »
Hi folks just got my frame back from PC just wondering if the gurus on here had any tips on what can be done to make it easier for the engine
 to go back into the frame I'm on my own all my mates are either on hols or offshore !!!

I'm a bit impatient and really want to crack on with the rebuild !!!!

Cheers

12
CB750 / Cam chain question ??
« on: September 14, 2013, 08:31:27 AM »
Hi folks I've got a couple of questions about cam chain adjustment ??

Does anyone have a idiots guide to doing it please ??
Is it best adjusted when the motors running ??
Does anyone have a spare adjuster lock bolt for sale my one doesnt look right !!!

Cheers Stu

13
CB750 / A few loom questions ??
« on: September 13, 2013, 11:28:28 AM »
Hi Folks i started sorting my loom last night i took the tape off that was a bit shabby and found a few things ??

I have found a 77 CB750 wiring loom diagram is this the same as my 76 F1 loom cant seem to find a specific 76 F1 diagram ??

At some places on the loom there is some silver grey tape covering joins in the loom is this a factory fit thing or has it been a bodge job ?? Also what is the best tape to re tape it when im finished ??

Can anyone recommend a good crimping tool for the bullet style connectors i have bought a kit so i can replace quite a few connectors as they are quite corroded and green ??




I have made a small light cluster in between my clocks each light has 2 white wires coming out the back off them i am planning on using my original light cluster wiring but i noticed that there are 3 green wires all spliced together can i just attach 1 green wire to each white wire and the other white wire to the original loom light wire so it will be grounded also there is 2 black wires also spliced together going to neutral and the oil light can i use these ??

 



Anyway thats all for now im sure ill have a few more questions when it comes to the wiring side,

Thanks Stuart

14
CB750 / lights ???
« on: September 04, 2013, 07:31:33 PM »
Hi Folks just wondering about my light switches on my bars ??

I've got P & H on the right side what do they stand for ??


Sorry probably a daft question but all my other bikes the lights come on automatically the cb is the oldest biker I've ever owned !!!

Cheers

15
CB750 / Battery Amp/H question ???
« on: September 01, 2013, 09:20:09 AM »
Hi Folks I'm looking for a new gel battery I noticed that the one that was in the bike is a 12v 14 ah one is this the correct ah for my 76 cb750 or do I need more or less ???

Cheers

Pages: [1] 2 3 4
SimplePortal 2.3.5 © 2008-2012, SimplePortal