Honda-SOHC
SOHC.co.uk Forums => CB350/400 => Topic started by: Ian Dixon on February 21, 2020, 03:41:25 PM
-
Hi, does anyone have information regarding the replacement exhaust system that is on offer fromBSM exhausts , ie quality, ease of fitment , sound - performance etc ? Any info would be welcome if anyone has had dealings with said piece of kit , many thanks , Ian..
-
Never heard of them until you mentioned them. That's because they are for the modern Honda CB-1, not the CB400 four SOHC. A bit expensive just for a muffler.
-
Hi nurse Julie , the picture they show is defo a cb400 ( 75-77 type sohc ) four fitted with one of their exhausts, they also show the parts components diagram too , wish I could figure out how to attach the screenshot I’ve taken to this post, it’s €449 for the whole system exlcluding x4 sealing rings .Must admit it wasn’t a company I’d heard of , just come across it while researching exhaust manufacturers for a replacement system, I currently have a motad fitted but have noticed small hole underneath silencer , shame as front pipes are very good.
-
Ah, OK, I just saw them on David Silver Spares but only for the CB-1 and the CB 500 twin. I think you have to have 5 posts to attach a photo.
-
Is this the pic you saw?
[attachimg=1]
-
Hi Julie, yes that’s it ..
-
Not for a 400 but I replaced the silencer on my CB750F1 with what I think was a BSM silencer from Dave Silvers Spares, it fitted well but it was very quiet but it soon perked up after I had drilled 4 holes in the end plate.
Cheers
Dennis
-
Thanks for that Dennis.