Honda-SOHC
SOHC.co.uk Forums => CB350/400 => Topic started by: trikerdrew on October 23, 2009, 02:16:02 PM
-
Looks ok.
could do with a paint
no cap
-
got any photos may help ;), cheers Mick.
-
Good point Mick!
here goes ;D
(http://i63.photobucket.com/albums/h133/trikerdrew/a1aa1030.jpg)
(http://i63.photobucket.com/albums/h133/trikerdrew/a1aa1031.jpg)
(http://i63.photobucket.com/albums/h133/trikerdrew/a1aa1032.jpg)
(http://i63.photobucket.com/albums/h133/trikerdrew/a1aa1033.jpg)
(http://i63.photobucket.com/albums/h133/trikerdrew/a1aa1034.jpg)
I am in Leicester. Posting no problem if that helps
regards
drew
-
That's a 550 tank Drew.
Here's a 400/4 tank (for comparison)
(http://www.nirvana-motorcycles.com/images/CB400%20Tank%20(web).JPG)
-
Might have a use for that, how wide is the channel down the centre, and how long is the tank overall (roughly)
Phil
-
is there any difference betweeen the 550 tanks,
ie would it fit a 550 k3 , is a supersport model different fitment ?
ps if phil needs it please give him first choice i am only experimenting with paint
-
Looks like a 550/k3 tank to me, I have a spare that's pinholed and didn't seal with petseal that could be used as a paint targett. Would seem a bit of a waste if the results came out well though, on a cruddy tank.....
-
Looks like a 550/k3 tank to me, I have a spare that's pinholed and didn't seal with petseal that could be used as a paint targett. Would seem a bit of a waste if the results came out well though, on a cruddy tank.....
That's just the sort of thing that would happen to me, test piece comes out beautiful and you can never replicate it on the real thing... :(
Phil
-
Firstly-Ain't my face red!!LOL
Cheers Steve D for pointing that out.
Hey Phil. It is 4" tween rubber mount bits and about 21" long, if that helps.
regards
drew
-
If that's the original paint I think it's an F1 tank. The F2 had stripes on similar to the 400 F2 tank shown above.
-
how different is that to a 750 F1/2 tank the fittings look remarkably similar
-
Not sure about fittings on the 750.
Worth a chance?
drew
-
I'm interested so long as it doesn't leak!!
Do you still have the tank & if so, can I have it for my Parts Bin Special? as I don't have a tank at all at present.
Cheers!
-
Hi Andy,
PM'd you
drew
-
Sorry Drew, I should have mentioned that I bagged a very nice tank on ebay a couple of weeks ago, so not looking at this one now,
Phil
-
Good for me though - perfect for my (currently tankless) special!