Honda-SOHC
SOHC.co.uk Forums => CB500/550 => Topic started by: philward on August 26, 2019, 08:58:20 PM
-
Ken, I used stainless crosshead cover screws in the covers - think they were JIS and from megapack on ebay
-
I bought these for my 500...
https://www.ebay.de/itm/Motorschraubensatz-Honda-CB-500-Four-V2A-Innensechskant-Edelstahl-Schrauben-NEU/192502156480?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649
-
I have a supplier that does that type in chrome Ken ;)
-
Everything from probolt is bloody expensive. I thought you were on about 80's and 90's Honda bolts
-
Anyone tried buying from this site? https://www.mrmegapack.co.uk/a2-bolt-nuts--phillip-screw-megapack---honda-cb550-26994-p.asp
-
Anyone tried buying from this site? https://www.mrmegapack.co.uk/a2-bolt-nuts--phillip-screw-megapack---honda-cb550-26994-p.asp
Yep, the sellers name is Andy. And if you enter mega5 at check out you will get a extra 5 percent discount ;)
-
He's very helpful. I bought a full bike set for my 400/4 and some were of the wrong length. After contacting with a list of what was incorrect and what they should actually be he sent the correct ones by return with an apology. He does state on his website if anything is incorrect to contact him first. This enables him to update his database to ensure future sets are correct. Can't get better really although I did spend hours polishing the heads!
-
As per my earlier post, I've used megapack and good stuff - I short ordered and contacted him - he sent the increased order and said just paypal me later. Great service.