Honda-SOHC
SOHC.co.uk Forums => CB500/550 => Topic started by: gordo on December 20, 2016, 03:45:26 PM
-
Hi guys dumb question time. Fitting 5 ohm dynatek coils and dynatek leads which have plug caps pre formed, any need to cut pre formed caps off and fit ngk 5 ohm caps?
Cheers gordon
-
Up to you. I've got Dyna 5ohm coils and use the NGK HT caps.
-
I used the dynatek caps.
Sent from my SM-N9005 using Tapatalk
-
Cheers guys just wanted to check as have a set of caps if need. Will run the dyna caps and see.
-
But you need resistors, either in the caps or in the plugs ("R"), so check if your Dynatek leads/caps have built in resistors.