Honda-SOHC
SOHC.co.uk Forums => CB750 => Topic started by: Pedro26 on May 10, 2023, 01:39:12 PM
-
Err,
Schoolboy error, I whipped off the gauges, the cables, the ignition and the headlight, then the headlight stay and moved stuff around, and out of the way, to get to the fork’s chrome etc. etc. but I didn’t photograph the routing for re-assembly. Would it be possible for someone to post a photo of exactly which way these cables route through the stay?
-
Pretty sure it's in Ash's Drop box or Aladdin's Cave
-
Don't know how useful these will be but here goes
(https://imagizer.imageshack.com/img923/2442/QC8OM4.jpg)
(https://imagizer.imageshack.com/img922/6460/6YIU04.jpg)
(https://imagizer.imageshack.com/img923/751/F9OoIN.jpg)
(https://imagizer.imageshack.com/img923/5196/O3HXg6.jpg)
(https://imagizer.imageshack.com/img922/7357/5nPQAB.jpg)
Will look for some more
Cheers
Dennis
-
Wow, that bike is mint! The diagram is helpful in showing where the speedo and tacho cables route, many thanks.
On the stay at the rear there is, on mine now, was, an inbuilt clip, with a plasticised surface. On my bike it had been bent to clip the front brake flexible pipe.
When I took it off again to rub it down ready for re-painting, I saw that the clip had parted company next to where it joins the rest of it spot welded to the main body of the stay. A little gutted to say the least, I thought I’d try brazing it back on using a Mapp torch. I’ve ordered the consumables and flux. Will practice first before attempting this.