Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Vespajaff

Pages: [1]

Project Board / Twin disc

« on: February 06, 2022, 09:58:00 AM »

Hi all what front end will fit 76 750 with twin disc is it a straight swap or headstock mods needed thanks ian

Project Board / Alloy tank

« on: February 06, 2022, 09:56:03 AM »

Hi all I am sure this has been asked before I have a 76 in many boxes and lots of parts missing so thinking of building a special where can I get a cr750 style tank from in the uk seen the hot works ones but thought £1100. Was a bit much anybody else selling one thanks ian

CB750 / Re: CB750k6 parts wanted

« on: September 29, 2019, 08:16:56 PM »

Ok that would be great and how much you would you want for it thanks Ian

CB750 / CB750k6 parts wanted

« on: September 29, 2019, 09:11:04 AM »

Hi guys need a few bits for my build if anyone has them laying around before I go on eBay or DSS rear engine mounting plate the small triangle one with 3 holes , brake pedal , rear wheel spindle and nut , starter motor , front brake calliper and a petcocck but bolt on type as I have I think a 71/72 tank . wanting to do a dry build as came in a lot of boxes was a mates spare bike he robed parts from 20 + years ago I am in Norfolk but going to copdock next week if anyone has anything cheers Ian

CB750 / Cb550 fork legs into cb750k6 Plus Oil Tank

« on: August 31, 2019, 10:28:41 AM »

Hi all sorry so many questions I am getting ready for a dry build . I have read a few places that say by fitting 550 legs to the standard bottoms so you can drop the from end so you don’t have the legs sticking through the yokes anyone done this . Also looking for a stainless or alloy square oil tank like carpycaferacers.com do is there anyone on here that makes them before I commission a local company to make one

CB750 / Silvers electronic ignition

« on: August 27, 2019, 06:15:37 PM »

Hi all looking for electronic ignition as bike has no points plate on it when I got it put a second hand set of points on or a kit from silvers for about £120 anyone tried them

CB750 / Re: CB750K6 frame replacement

« on: August 13, 2019, 06:35:26 PM »

Hi centre stand also seat brackets seat lock and side panels it was going to be turned into a cafe racer but it still has a nice set of lester wheels

CB750 / CB750K6 frame replacement

« on: August 13, 2019, 05:27:26 PM »

Hi all new to the group I have got a 750K6 but someone has cut off all fixing lugs and stand bracket so I was thinking a replacement frame would be the best bet , would I only be able to use a k6 or does a K5 or K7 take all of the 6 parts . This is my first 750 but do have cb350 and 400 thanks Ian ps if anyone has a frame for sale please let me know