Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - Bryanj

Pages: [1] 2 3 4
1
Misc / Open / Help required if we have an Irish member
« on: April 21, 2022, 03:58:12 PM »
My wife wants a specific gardening tool made in Ireland and cos of the B word they wont ship to UK.
Is there anybody who could possibly purchase and ship to me, i will obviously cover all costs plus a few Guiness tokens.
Thanks
Bryan
EDIT.
Found the selling firm is in Germany so if any EU member can help out i would be very gratefull

2
CB500/550 / 550f chrome chainguard
« on: January 23, 2022, 01:57:48 PM »
Somebody recently wanted a 550f chrome chainguard but i cant find the post.
I just found one in my stash in reasonable condition so if whoever it was wants to pm me i will supply pics

3
CB500/550 / 500 gearbox sprocket cover
« on: November 28, 2021, 07:40:09 PM »
Somebody wanted a 500 sprocket cover and as my mate is now out of hospital i managed to collect the orrible spare i have but cant find the post with the question in, always was damn useless with these electronic new fangled tinternet thingies so if whoever wanted one reads thisplease pm me with you email and i will send some pics.
Cheers All
Bryan

4
Misc / Open / Info on "lost" vehicles
« on: November 15, 2021, 11:12:45 AM »
Hi all,

We seem to regularly get the question "where is my old bike"

By chance i found an app call Dashoard which gives you details of registrations held by DVLA
Includes date last V5 issued plus link to mot for advisories, useful if going to look at a new vehicle to buy

5
Misc / Open / DVLA Service?
« on: September 27, 2021, 08:31:43 PM »
14 weeks to send a new V5C then 9 days later they are sending a threatening letter saying tax it or sorn it!!

Bloody govinment beurocratic twaddle

6
Misc / Open / Racism
« on: March 02, 2021, 10:05:46 PM »
Dr Zeus has been said to beracist
God help humanity!!!!

7
Site Feedback / FAQ / How to... / New membership level for 5000+ posts?
« on: December 22, 2020, 11:12:38 PM »
Grogu?

8
Tricks & Tips / Wheel buiding the easier way
« on: October 19, 2020, 08:45:45 PM »
If you want to rebuild your ownspoked wheels try my instructions below.

Please advise if you think it dont make sense

Look at the bent end of the spokes and sort them out into the two different sorts.

Look at one of each spoke plus the hub, one type of spoke goes from outside to inside(you can see the head of the spoke from the outside), the other type has the head on the inside of the hub flange you will normaly find witness marks on the hub flange.

Take the set that go from outside to inside and fit to the hub.

Lace these 20(if its a 500/550/750--16 if 400) to the rim tighten evenly and true the wheel using a stand or whatever remembering that the rim will "kick" where it is welded and that a DTI is way too accurate, both Honda and VOSA(MOT) state 3mm(1/8 inch) for both ideways and radial max limit.

Because there are only 20 spokes to work with its easier to true but do get all 20 at even tension, the ding test is fine,

You can now easily fit the other set of spokes one by one and tighten evenly.

NOTE:-

You must get the type of spoke in the correct order as you can not fit the outside to inside spokes second without bending them!!!



9
CB500/550 / Build date
« on: August 08, 2020, 09:23:14 AM »
Some body asked me about date for frame numbers but did it in a post not a pm, now i have my id book i cant find the post.

Please ask me again

Its geriatricy setting in, plus first week back after 17 furlough so im blaming that

10
CB500/550 / NOS 500 K0 headlamp brackets
« on: June 22, 2020, 03:01:50 PM »
Anybody want these rare brackets, price put me off!
Ebay number 254627784061

11
CB500/550 / Condensers
« on: June 10, 2020, 09:55:24 AM »
Somebody recently put up a picture of a cheap condenser from a Range Rover V8 that they thought might fit the SOHC well i got some(had to buy 10 to make carriage worth it) to find they will not fit direct onto points plate due to the "pip" on the plate that goes into a small hole in the mounting plate on original condenser.
OK question for the electronic people on here. What happens if you put 2 condensers in parralel? Will it work or will it cause agro? Idea is to fit a couple of the rover ones at the coilas well as the ones on points plate. I know if it was just at coil it would be OK as Triumph did that for years, just want to leave points plate looking original if possible.
Cheers all.

12
Recommended Sources for Parts and Services / Swing arm collar
« on: June 06, 2020, 09:33:49 AM »
I am working on a members 500 and found play in the swing arm.
As usual the collar was worn more than the bushes.
Normal hours spent removing bushes and bronze ones ordered from Julie.
Next problem new collar needed Silvers and CMS  both well over £80 delivered and Silver no stock.
Found Andy Ceepoc on ebay had stock and delivered from Germany in 3 days for £69.
I know Andy has a mixed rep on here but in this case i cant praise him enough.

13
Tricks & Tips / Transmission circlips
« on: May 14, 2020, 01:25:29 PM »
Some time back i remember reading a post on which way round to fit circlips, may have been here or on US site but either way i just found my Service Letter book and attach a picture of a bulletin dated 26/06/1968

14
Misc / Open / Basic carb balancing
« on: March 24, 2020, 03:32:38 PM »
I have a post in tricks and tips on Basic Bench Setting which I have just gone back to, re read and slightly modified.

www.sohc.co.uk/index.php?topic=17769.msg153069

Any comments appreciated.

Keep well
Bryan

15
Announcements / Seasonal groatings
« on: December 02, 2019, 10:27:33 AM »
As it is now December and we are moving easter eggs i thoght i would get in early and wish all on here a happy christmas and a merry new year

Pages: [1] 2 3 4
SimplePortal 2.3.5 © 2008-2012, SimplePortal