This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Topics - SteveW
76
« on: June 03, 2018, 08:36:56 PM »
Got a very slightly intermittent kill switch on the 550, when the bike is running its fine.
If you turn the bike off with the kill switch, put it back to on, the bike will sometimes not fire.
Moving the switch a few times through the positions and then back to on, it fires up.
Think it just needs a clean, but wasn't sure if it can be stripped down?
77
« on: May 18, 2018, 10:54:33 AM »
Need a new seat cover for my K0 550, Silvers have them for a very reasonable price.
Does anyone know if they are any good or are there better ones out there?
Thanks.
78
« on: May 08, 2018, 02:45:47 PM »
My second hand steering lock and key arrived today. I pulled the key out and thought, that number looks familiar. Got my bike keys out and the numbers are the same  I might go and buy a lottery ticket later 
79
« on: May 04, 2018, 10:09:07 PM »
Just removed my ropey 4 into 2 exhaust, no idea what make.
Fitted my Motad 4 into 1, the bracket on the Motad stops the center stand but only just.
The very edge on the bracket just stops the very edge of the stand foot and the stand foot the other side is probably only 10mm from the chain.
I have made the clearance bigger for now by fitting a bolt facing the ground in a hole in the bracket so the stand hits the bolt. Does the job but looks a bit naff.
My question is, when these bikes were new, what was there to stop the center stand?
My old exhaust sat lower than the Motad so it was just the silencer stopping the stand.
80
« on: April 29, 2018, 05:32:14 PM »
First pic is my 74 CB550 K0, ignore the metal plate with switches on someone added, ive got rid and moved the ignition switch back to the correct place.
Second pic is from a bike on Ebay, also a 74 550.
Idiot lights are in a different order?
81
« on: April 22, 2018, 08:24:53 PM »
Thats one way of doing it 
82
« on: April 19, 2018, 03:55:56 PM »
Today is the first time I've taken my 550 K0 out for a decent ride since getting it registered.
Normally oil pressure light goes out the minute the engine fires.
Done about 50 miles, but noticed that after about 15 miles the oil pressure light would come on at anything below 2000 rpm.
Let it cool down for an hour and it was back to normal, oil light goes out the minute the engine fires up.
Rode around a bit more and its starts doing it again, oil light on below 2000 to 2500 rpm.
Using 10W 40 oil, oil was only changed 100 miles ago.
Engine sounds normal, bike performs normal.
Seems as if the oil is becoming too thin in the hot weather?
83
« on: March 11, 2018, 01:06:16 PM »
Mine has never worked, the key only wants to go in about half way.
Just wondered if i can remove it and strip it down to clean.
CB550 K0.
84
« on: February 26, 2018, 10:54:35 AM »
Just replacing mine, one is glued on, the other just pushed on?
Should they be glued?
85
« on: February 19, 2018, 06:38:42 PM »
Just wondered, sent all my paperwork off a week ago for my US import. They had absolutely every bit of info they asked for. I know its only been a week but i'm impatient
86
« on: February 13, 2018, 10:10:15 PM »
Anyone doing it this year, 30th September?
I've just signed up for the Oxford one.
(That's is the DVLA give me a reg number for my bike by then, paperwork was posted today)
87
« on: February 12, 2018, 05:12:05 PM »
My imported 74 550 passed its first UK MOT today with only the one advisory.
The swing arm can be rocked left to right very slightly, does this mean new bushes etc or is there any kind of adjustment that can be carried out?
88
« on: January 31, 2018, 09:19:46 PM »
Got a text from the wife saying she was in Casualty. When I got home I watched all 50 minutes of it, never saw her once. She still hasn't come home yet. I'm starving 
89
« on: January 30, 2018, 05:06:57 PM »
Does my lower shock mounting look normal in the pic below?
I have compared it with pics online and mine looks way different, looks like I have an extra bracket that moves the mounting point backwards.
74 550 K0
90
« on: January 25, 2018, 08:37:32 PM »
Just getting my CB550 ready for its MOT, noticed that the previous owner has put a 4.25 wide rear tyre on it.
Seems fit ok, haven't ridden the bike yet due to knackered carbs, electrics etc etc.
Is 4.25 too wide?, I will probably be changing tyres soon, should i go for a 4.0?
|
Show Posts