This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - JamesH
Pages: 1 ... 147 148 [149] 150 151 ... 160
2221
« on: April 05, 2014, 02:37:46 PM »
Antony is the ultrasonic tank heated? It's really best to try and strip the individual carbs but you could clean the assy 'complete'. Obviously pull off the float bowls and unscrew the pilot / main jets. I'd also take out the floats and needle valve / seat - this is where the main supply of fuel enters the carbs and is a bottleneck. You'll need an airline to properly blow through all orifices after cleaning. It's time consuming and you need to be methodical but it's a rewarding job.
2222
« on: April 05, 2014, 02:18:02 PM »
+2 on that. Worth pulling the plug caps and putting a multi-meter across the plug caps individually and across the pair of ht leads from each coil to check the impedence. Should be 5kohm caps and 15 on the coils
2223
« on: April 04, 2014, 11:28:46 PM »
Have you tried running the bike on a later set of std carbs with the twin linkage? At least a known good set of carbs would tell you if yours are suspect, Did the bike come from the dealer in Ireland that have ceased trading?
2224
« on: April 02, 2014, 08:37:46 AM »
Yeah I managed to confuse myself then - that's a k4 on fin detail so must be a k4..
2225
« on: April 02, 2014, 12:20:35 AM »
Welcome to the forum mate. Make sure you change that 16" rear rim as well....looks like a k3 to me based on the engine fin detail..?
2226
« on: April 01, 2014, 07:08:39 AM »
Looks like someone bought it already....
2227
« on: March 31, 2014, 09:39:28 PM »
Someone buy this before I do.... http://bit.ly/PbfyzXComes with a spare cb750 as well!!
2228
« on: March 29, 2014, 07:00:03 PM »
Do you want me to pull mine off and post it to you on loan so you can make a copy?
2229
« on: March 29, 2014, 06:58:41 PM »
Yeah pretty sure that's the part...
2230
« on: March 25, 2014, 08:27:26 AM »
This is why this forum is so awesome. Nice one Lester.
Billy, looks like it's coming together nicely - what's the final colour going to be?
2231
« on: March 24, 2014, 09:01:24 PM »
I think thats good value when you add up the cost of a second hand tank, side covers plus paint....
2232
« on: March 22, 2014, 07:19:52 PM »
Have posted a wanted in the 'wanted' section - anyone got a spare available? James
2233
« on: March 22, 2014, 06:28:00 PM »
Agreed - looking awesome mate
2234
« on: March 22, 2014, 06:27:44 PM »
Welcome mate
2235
« on: March 22, 2014, 01:37:01 PM »
Ash - I can probably stick that on a public dropbox account. Will email you a link to upload to and we can then share with all
Pages: 1 ... 147 148 [149] 150 151 ... 160
|