Honda-SOHC
SOHC.co.uk Forums => CB500/550 => Topic started by: peterengland on February 27, 2019, 05:13:47 PM
-
What is the little brass couloured screw/nut on the bottom front of the float bowls for on PD46A carbs?. The nut is knurled. I had a leak from one on carb 4 but just tightened it and now it's fine.
-
Are you talking about the drain screw?
-
I don't know, it's up where the bowl joins the carb body
-
If its the vertical one on the engine side of the carb its the pilot mixture screw