Honda-SOHC
SOHC.co.uk Forums => CB750 => Topic started by: pamsman on June 10, 2021, 07:36:49 PM
-
Does anyone happen to have a rear brake pads retaining spring and pad pins for a 1977 CB750 F1 or could suggest if one off another bike may fit please.
-
Honda GL1000K1 is the only other bike that uses those pins, pads and retainer. Dave Silver did have some of the pins about 18 months ago when I bought some.
Sent from my POT-LX1 using Tapatalk
-
I will have a look in my wing bits box
-
Thanks Bryanj, if not I'll give DS a try. Thanks lads tricky little things often hold up things for months.
-
I dont have the seperate bits but i do have a complete GL1000 rear caliper compete with pads still in it, you can have the lump for £15 plus post