Recent Posts

Pages: 1 [2] 3 4 ... 10
11
CB500/550 / Re: Relocating or alternative to ignition switch
« Last post by DomP on Today at 03:37:38 PM »
Quote from: Bryanj on Today at 02:02:42 PM
What actual model is it and where is the ignition switch now?

Hi Bryan, it's my cb550f1 with the hugely long centrally mounted ignition barrel which I'd like to move somewhere more discrete
12
CB350/400 / rotor removal tool. Also Gaskets
« Last post by Eldrick on Today at 03:29:27 PM »
When I replace the alternator later this week is it best to have a rotor removal tool?
I also need to replace, at least, the rocker cover gasket and maybe the cylinder head gasket, not sure yet where the main leak is. From which supplier will I get the best quality gasket set please?

13
CB500/550 / Re: Honda man ignition
« Last post by Bryanj on Today at 03:06:01 PM »
He has only had one failure caused by mounting in a bad place so the box filled with water after more than a year which he repaired free, i would happily use one along with a nos honda points plate
14
CB500/550 / Re: Honda man ignition
« Last post by rmii on Today at 02:37:06 PM »
Hello hello!

I use it. It is a very robust box, simple installation and efficient. (recommended by Roo o/)
I will keep doing the timing adjustment as I've learned to like it.

Do you have any doubts about the need or setup?
15
CB500/550 / Re: top end gasket set recomendations
« Last post by Bryanj on Today at 02:05:52 PM »
Its not the head you need to skim but the barrel so as to reduce the depth of the recess for O ring by 3 to 5 thou.
I did once think aboutputting a small shim in the recess but getting an accurate sized shim that thin did not appear easy
16
CB500/550 / Re: Relocating or alternative to ignition switch
« Last post by Bryanj on Today at 02:02:42 PM »
What actual model is it and where is the ignition switch now?
17
CB500/550 / Re: Relocating or alternative to ignition switch
« Last post by Laverdaroo on Today at 01:25:33 PM »
More than likely, cue Bryan, Ash, Ken; Oo, sorry

Isn’t there a link on the classic octane site for a slot into the loom 4 way key barrel, I’m sure there is but you may need to list the videos and go to the links on each one to see but I’m sure there’s a link, maybe a hamazon link.


Sent from my iPhone using Tapatalk
18
CB500/550 / Re: top end gasket set recomendations
« Last post by paulbaker1954 on Today at 12:38:03 PM »
I went through a nightmare around DS aftermarket gasket set tring to fix an oil leak.

 I ended up using the aftermarket O rings along with a proper Honda OEM gasket plus having head skimmed.

As many have said the relative thickness of head gasket and O rings is critical to getting a oil tight seal.

19
CB500/550 / Re: Relocating or alternative to ignition switch
« Last post by DomP on Today at 11:16:07 AM »
Yeah Motogadget was just a step toofar financially for me, I keep thinking 'cheap build remember, cheap build'  🤣

I'm sure an electrical genius will answer my query
20
CB500/550 / Re: Relocating or alternative to ignition switch
« Last post by Laverdaroo on Today at 08:52:26 AM »
I’ve the Motogadget Dom as you know but  that’s what straight onto mine.


Sent from my iPhone using Tapatalk
Pages: 1 [2] 3 4 ... 10
SimplePortal 2.3.5 © 2008-2012, SimplePortal