Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Green1

Pages: 1 ... 166 167 [168]
2506
Misc / Open / Re: cb750 exhaust clamps
« on: July 03, 2012, 01:45:28 PM »
Hi bitsa I don't know if we get this fuel in the uk as I am to lazy to look at the pumps.But I have had loads of problems with carbs and injectors blocking and O rings deteriorating on fuel lines on various vehicles.Most resent was on my Triumph Speed 4 I changed the speed connectors on the fuel lines about four months ago but it dumped its fuel over the engine yesterday due to perished O rings.
I to have decided all modern materials are crap.I have noticed everything change and i am only 27             

2507
CB750 / Cafe Racer
« on: July 02, 2012, 09:48:48 PM »
Hi all did I just see them cut up a sandcast on Cafe Racer :o :( :'(

2508
CB750 / Re: cam chain rattle
« on: June 28, 2012, 08:16:22 PM »
Hi all thanks for the quick response.I know I was adjusting it right so it looks like I will be removing the engine :( as the bike has covered around 69thousand.It looks like it has been apart not that long ago so I assumed it had been done.I think I will try to contact the last owner in America to see just what has been done.       

2509
CB750 / cam chain rattle
« on: June 27, 2012, 06:33:53 PM »
Hi tried to adjust the cam chain yesterday but it won't stop rattling.I pulled the tensioner adjuster out and oiled it that now moves freely.Does this mean I need to replace the chain.If so what's involved.
Here is a photo just because all good threads need a bit of eye candy.
 Cheers Mick. 

2510
CB750 / Re: master cylinder re build
« on: June 26, 2012, 09:09:22 PM »
Hi I think I will rebuild as the master cylinder is silver.Just need the time and money to mess with the bike.None of my bikes seem to be working at the moment  >:( :(just as the weather turns nice  typical.

2511
CB750 / master cylinder re build
« on: June 24, 2012, 05:42:01 PM »
Hi all how hard is it to rebuild the master cylinder as mine has decided to pee out all over my week old paint work :'( :'(
Cheers Mike

2512
New Member Introductions / New member says Hi
« on: June 24, 2012, 12:42:32 AM »
 Hello from Essex been following the site for a while so I thought it was about time I introduced myself.Pics to follow shortly.
Valley Green Metallic are there any more in the uk

Pages: 1 ... 166 167 [168]
SimplePortal 2.3.5 © 2008-2012, SimplePortal