This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - Jae
Pages: [1]
1
« on: July 16, 2017, 09:55:33 AM »
Hi, I went and bought 4 new air screws, popped them in and totally unable to balance my carbs, so old ones have gone straight back in. The only difference I can see is that the new ones seem to have a small hole in them half way up the stem...Whats that all about? Have I gone and bought the wrong air screws 
2
« on: July 03, 2017, 05:00:46 PM »
3
« on: July 03, 2017, 04:58:18 PM »
Hi,
I have a K4 with tank valve that has two feeds and wondered what the internal dia of the fuel line should be, because I heard that fitting a smaller dia fuel line can effectively starve or throttle the carbs of fuel on acceleration? Is this right?
Cheers,
4
« on: July 01, 2017, 11:40:39 AM »
Thanks everyone....for a moment I thought I`d hit a nerve... 
5
« on: June 30, 2017, 09:35:14 AM »
is this a taboo subject...
7
« on: June 27, 2017, 08:45:04 AM »
Thank you for your comments...much appreciated 
8
« on: June 26, 2017, 09:48:42 AM »
D & M Engineering are in Blisthorpe, they are excellent at tuning classic Honda race bikes
Unit 3. Brailwood Close. Blisthorpe. Newark. NG22 8UG. 01623870921
Ask for Dave, he`s your man 
9
« on: June 26, 2017, 09:45:45 AM »
Hi, At the moment I tend to have to change my CB750 battery every 12-16 months....  Used Yuasa, Bosch and others, none seem to last forever. So I was wondering about using a trickle charger? are they worth it or is it best just to stick with replacing battery's? Jae
11
« on: May 18, 2016, 09:45:10 AM »
Nice one.... ;o)
I`m looking to get my side panels re-sprayed, but I`m having trouble finding the Valley Green Metallic top coat and the Candy Silver basecoat from anyone in the UK
Any help would be appreciated.
12
« on: July 26, 2015, 02:29:41 PM »
Hello, I took the old girl out for her first ride this year! Late I know, but shes had some issues. Anyway, it wasn't a big run, just 50miles and noticed vibration from the foot pegs when motoring around 60mph. When home I checked all engine / exhaust mounting bolts were secure which they were, so wondered what could be causing this. Never done it before... and wondered if a chain with a 'tight spot' could be the problem? and if so would this replacement chain from DS be ok? http://www.davidsilverspares.co.uk/parts/part_105899/Any help would be appreciated. Jason Honda CB750 Four K4
Pages: [1]
|
Show Posts
