Honda-SOHC
SOHC.co.uk Forums => CB500/550 => Topic started by: florence on August 02, 2021, 07:16:57 PM
-
On my 500, I noticed one of the float bowls is weeping a little and realise I might have to replace the seal. I thought, while they were off it might be a good idea to do the seals on the jets at the same time. The last time I overhauled the carbs fully was 26 years ago and possibly, back then, I used the original ones anyway.
Before starting this mini project I've been looking online but it seems hard to find kits that have just the O rings, I don't want jets or float valves or anything. Has anyone found such kits anywhere?
The other thing I might need is a supply of float bowl screws as the original ones are a bit chewed.
-
Nurse Julie does all the 0'ring upgraded carb kits and JIS screws ;)
-
Not sure where you are looking but I sell them on ebay. PM me and I will give you a little discount
[attachimg=1]
[attachimg=2]
-
That's amazing, thank you.