This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - Bryanj
1
« on: Today at 08:17:22 AM »
15 to 17 is a big jump, personally i would fit one of the bigger rears from cms to compensate
2
« on: Today at 08:14:45 AM »
De gunge the bad bits and paintwith smoothright or similar but you willhave to opeup lower yoke a bit so as not to scape paint off, the rest of the i thin will run ok but cant get close enough on pics. I replied to your pm with a fix for the seal ares if needed
3
« on: May 17, 2024, 08:02:58 PM »
Tie the lever to the bars and walk away for 24 hours and/or threaten to throw the f*▪︎kn thing out the window.
Worked for me at Meads
4
« on: May 17, 2024, 08:01:53 PM »
Seals will never get that far up the tubes, i can give you a "dirty" fix that will last a while if you pm me
5
« on: May 17, 2024, 05:57:57 PM »
CMS show 38 and 39 toothin stock, what size are you after
6
« on: May 17, 2024, 05:35:02 PM »
That would mean you could regrind a crank, does anybody know if the journals are hardened cos i dont
7
« on: May 17, 2024, 12:38:01 PM »
Years ago i went to UK2.NET and now pay about £6 a year for blj.org.uk and they happily forward emails sent to there to as many other addresses as i wish, this is why if you hit reply on one of my mails it disapears and i dont recieve it but that dont bother me as if people dont read the bit where i say only send to blj@blj.org.uk do i need to talk to them!
8
« on: May 17, 2024, 08:24:40 AM »
Thank you very much for all your kind comments, just talking/reading/answering brings a modicum of reality back
9
« on: May 17, 2024, 08:22:50 AM »
The hill yes, roads at the top close differently but usually the cirencester one, watch out for the new roundabout just after the one at top of hill
10
« on: May 16, 2024, 08:15:29 PM »
You should find the spring washer will fit over the plain shank of the bolt but the plain washer will not
11
« on: May 16, 2024, 08:13:30 PM »
John, DO NOT pretend to be a coach in Bourton, they are now banned and not allowed to park!!!
12
« on: May 16, 2024, 08:12:09 PM »
On an old bike it was always stated at estimate time that any extra work due to broken/siezed bolts was at the expense of the owner
13
« on: May 16, 2024, 08:06:28 PM »
You wana smell the stuff that comes out of a Leyland lock up flywheel on a coach, its burn the ovies if you splash it
14
« on: May 16, 2024, 08:04:53 PM »
I have always used NGK resistive caps and non resitor plugs simply cos thats what the rep said, never asked why as he was very knowledgeable
15
« on: May 16, 2024, 07:58:49 PM »
You are welcome, having done a few imports it gets easier!
|
Show Posts