Honda-SOHC
SOHC.co.uk Forums => CB500/550 => Topic started by: MikeM on May 15, 2014, 07:00:41 PM
-
fitting exhaust and came up against a small issue, one stud on no 3 exhaust is coming out when I have fully tightened bolt on, when I take the nut off it pulls stud out
how can I get the stud all the way in ?
-
Put two nuts on so one locks up against the other.Add a bit of retainer (if you have) and wind it in.
-
If you mean the stud is pulling out you will have to helicoil the hole