76
Project Board / Re: CB550 K0 #449
« on: November 26, 2020, 04:07:15 AM »
The rear sets I made from the stock peg mounts and a set of 82' V45 Sabre foot peg mounts. I cut 150mm out of the middle of the back fender after I removed the mount. Then welded back to the mount with the taillight wiring tunnel intact. For the seat I modified the stock base so it still uses the hinge and seat lock. A shop did the foam and the seat cover. We went with Hagon shocks and installed needle bearings in the swingarm.