Honda-SOHC
SOHC.co.uk Forums => CB350/400 => Topic started by: Matt_Harrington on July 11, 2022, 06:17:37 PM
-
Could someone tell me how long these lines are that are labelled (2)
[attachimg=1]
Do they just 'dangle down' in case of an overflow?
Item (1) was very hard and difficult to remove but I can replicate that one easily.
Matt
-
If you make them about the same length, once fitted, as the float bowl drain tubes, that'll be about right. They are air vent tubes, they just dangle down to atmosphere.
-
Ta very much! I'll let them dangle! ;)
Matt
-
They fall between the rear of the engine casing and the frame, and are held together in a square shaped plastic former.
-
The two carb vents go over the air manifold and down between the crank case and swing arm.
[attach=1]
[attach=2]
-
Thanks - those are useful for the routing. Matt