This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - mickwinf
Pages: 1 2 3 [4] 5 6 ... 101
46
« on: January 21, 2024, 09:24:12 PM »
They are a different width where they fit in the recess in the airbox.
47
« on: January 19, 2024, 01:13:03 PM »
ah Simon, it was a strange thing as It came as an email from Steve even though he didnt know anything about it! does your number end 535? if so i will text you to sort it.
48
« on: January 18, 2024, 10:15:03 PM »
Dom has got sorted but someone else tried to get in touch needing one but a technical issue meant i didnt know who it was. Please get in touch again.
49
« on: January 16, 2024, 09:02:34 PM »
Recieved my carb rod today thanks Ken, really looks the dogs dangley bits.
50
« on: January 15, 2024, 10:52:53 PM »
I have 2 spare so could help you out.cant remember how much they cost but will find out and you can have one for whatever they cost me.
51
« on: January 14, 2024, 10:33:12 PM »
Indeed i have a spare d ring as I lost mine and bought another from Oddjob, then found the original!
52
« on: January 12, 2024, 11:02:02 PM »
I think they do chrome plated or stainless.
53
« on: December 24, 2023, 12:46:32 PM »
Just found them ken, sorry but they are 500 rings not 550.
54
« on: December 22, 2023, 05:10:18 PM »
I too will be buying a set for lazarus, and have noticed Silvers lists 2 options, a bare set and one including the brackets, gaskets and rubber connectors for only £45 +vat so good value if you need the full lot. Assuming the exhausts are the same of course.
55
« on: December 22, 2023, 09:54:46 AM »
the problem with the lining process is flash rusting before I can dry the tank out to line it. will try today.
56
« on: December 21, 2023, 11:31:24 PM »
Completely forgot will look tomorrow
57
« on: December 21, 2023, 01:44:15 PM »
While de-rusting the tank it revealed several more small holes around the reinforcing area where the rear tank mounting is. I have soldered them but still getting a small leak from somewhere inaccessible so am going to use a liner. Not ideal but it's my only option.
58
« on: December 21, 2023, 09:45:51 AM »
Ken I might have a part set as i seem to remember breaking a ring, think it was a 550 so will have a look later today.
59
« on: December 16, 2023, 09:54:06 PM »
A couple of small victories today. The brake bleeding saga was solved by a new repro from silvers, still took a while but bled in the conventional way and a firm lever now. Also did a soldered repair on the tank, as the hole was only 2-3 mm it seems to be ok. De-rusting tank with phosphoric acid ready for paint, almost there!
60
« on: December 10, 2023, 03:54:31 PM »
Hi Julie, am feeling a bit better until my garage roofing felt went AWOL in the wind last night! It's the original pressure witch so hope that's not it.
Pages: 1 2 3 [4] 5 6 ... 101
|
Show Posts