Recent Posts

Pages: 1 ... 8 9 [10]
91
CB500/550 / Re: CB550 Oil Filter Bolt Removal
« Last post by Mike_Berkshire on April 24, 2024, 05:05:57 PM »
Nope - no washer on the one I removed. Spring, yes. Washer, nope.
92
Desperately Seeking!! / Re: 400/4 Air Filter 'Panching Plates'
« Last post by Bryanj on April 24, 2024, 05:04:28 PM »
Dave, i will email/pm you with the details of the oh shit factor
93
CB500/550 / Re: CB550 Oil Filter Bolt Removal
« Last post by Johnwebley on April 24, 2024, 04:35:20 PM »
Quote from: Deano400 on April 24, 2024, 04:09:23 PM
Check for the washer between the spring and the oil filter. Often stuck to the oil filter and often accidentally binned. I have 3 engines here and none of them had the washer.

BTW mine are 400s, I imagine yours has a similar washer.
Yes, the 500 has them
Fit between filter and spring

Sent from my SM-A546E using Tapatalk

94
CB500/550 / Re: CB550 Oil Filter Bolt Removal
« Last post by McCabe-Thiele (Ted) on April 24, 2024, 04:30:02 PM »
Result - you can't sometimes beat brute thuggery.👍👍👍
95
Desperately Seeking!! / Re: 400/4 Air Filter 'Panching Plates'
« Last post by AshimotoK0 on April 24, 2024, 04:12:31 PM »
Quote from: Laverda Dave on April 24, 2024, 03:45:14 PM
Thanks Ash👍. I have some 1mm aluminium perforated sheet on order from eBay just in case I have to make something. I know it should be steel but I think the top plate will be difficult to fabricate with all the bends involved and Ali is a bit more pliable. Hopefully you may have something in your stash. The build is coming along nicely now with all the sub assemblies finished.

I deffo have the one with bends I reckon and has been re-plated  :)
96
CB500/550 / Re: CB550 Oil Filter Bolt Removal
« Last post by Deano400 on April 24, 2024, 04:09:23 PM »
Check for the washer between the spring and the oil filter. Often stuck to the oil filter and often accidentally binned. I have 3 engines here and none of them had the washer.

BTW mine are 400s, I imagine yours has a similar washer.
97
CB500/550 / Re: 550f master cylinder
« Last post by Laverdaroo on April 24, 2024, 04:05:10 PM »
No worries mate


Sent from my iPhone using Tapatalk
98
CB500/550 / Re: 550f master cylinder
« Last post by DomP on April 24, 2024, 04:03:34 PM »
Thanks Roo that's brilliant mate, I'll let you know ghow I get on
99
CB500/550 / Re: CB550 Oil Filter Bolt Removal
« Last post by Johnwebley on April 24, 2024, 03:59:22 PM »
Good for you,

The idea of the small head, is to stop it being tightened to much,

I also grease the O ring under the head to prevent it sticking/corroding

Sent from my SM-A546E using Tapatalk

100
CB500/550 / Re: CB550 Oil Filter Bolt Removal
« Last post by taysidedragon on April 24, 2024, 03:57:28 PM »
Well done. Victory!
Pages: 1 ... 8 9 [10]
SimplePortal 2.3.5 © 2008-2012, SimplePortal