This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - McCabe-Thiele (Ted)
1
« on: Today at 06:01:40 PM »
I'm with Roo here, run it get the pistons to settle in a bit, it's amazing what some warming and cooling down of an engine can change.
If your dynamic timing is set a few miles will help you balance the carbs with more certainty as and when.
2
« on: Today at 11:40:54 AM »
3
« on: Today at 11:38:08 AM »
How much - 80 Euros for a bulb!
4
« on: Today at 11:35:35 AM »
In my 60 years on two and four wheels it has always been the oil switch - one day it might not be.
My neighbour panicked when his oil light started flickering on his newish Kia 4x4, the Kia agent could not fix it it for over a week, they advised him not to drive it
He sought my advice, he took the vehicle to his normal none Kia garage who fitted a replacement for about £35.00. It fixed the problem. He was happy to pay even though it was still under the 7 year warranty so he could have use of the vehicle.
5
« on: June 01, 2024, 10:39:53 PM »
As Bryan has said the parts book is very good at identifying where things like O rings or oil restrictors fit.
As you probably know the block base gasket fits on the crankcase, the larger four block seal rings fit in the groove on the underside of the block. You will need to use red rubber grease on them so they stay in place when you fit the block over the pistons. You also have the fiddly part of fitting the cam chain tensioner blades. You might find it helpful to read that section in my 500 project thread (Page 35) or another members thread.
Using the search facility on this site will also list posts where a subject has arisen before so you can be read a variety of solutions & outcomes.
6
« on: June 01, 2024, 06:30:17 PM »
That's dreadful Dave now't worse that Hit & Run drivers - they don't seem to bother even if they hit a pedestrian.
Just a lack of integrity and values that seems so prevalent today.
The apparent lack of everyday Roads Polcing is the start of something they will live to regret.
As a probationer you learnt to engage with the local population through stopping motor vehicles and talking to young drivers well meeting local criminals in the process.
My first arrest for a garage burglary was when I stopped a local lad in Clowne near chesterfield for driving through a short pedestrian tunnel.
I noticed that the wheels on his old Austin 1100 looked almost brand new, I was aware of a theft of wheels from a private garage. Duly arrested, invertigated, home searched and charged with Burglary - as my old Sergeant used to say most Burglars don't walk to a commit crime.
7
« on: June 01, 2024, 01:31:15 PM »
Could be an automatic OS update might be the cause.
8
« on: June 01, 2024, 01:29:53 PM »
Personally I wouldn't fit anything that could possibly lead to annoyance like blinded oncomers. I was raised with the proverb: what you do not want done to you, do not do to others.
I agree with your comments, nowt wrong with putting a moral stance in amongst the technical details. A lot of current modern car LED lighting leaves a lot to be desired be it overly bright dip beams to side indicators that are hard to see in good daylight as some are very narrow. Might be legal but can still cause annoyance.
9
« on: June 01, 2024, 11:52:21 AM »
When we took our Sl for it's Mot a couple of years ago the tester at the MB dealership failed it on the number plates digit spacing.
The combination of 4 letters & one number were not mis-spaced to spell a name the plates were marked with the the plate manufacturer details plus the relevant BS code or whatever was the law 20 years ago when we bought the plates. It had passed it's Mot at the same MB dealer as it was since 2004.
Despite my protestations the tester would not re-consider the fail. IMHO he was applying the spacing rules for a modern 7 digit registration marks to a 5 digit plate incorrectly. I purchased a replacement set of plates online the - the only slight difference I could see was the gap between the first letter and the next number was marginally closer about 1/4" on the new plate. I was not charged for the re-test.
10
« on: June 01, 2024, 11:38:14 AM »
I believe it depends on the value that the exporter puts on the export certicate declaration.
11
« on: June 01, 2024, 10:22:33 AM »
Perhaps if sales are good they will make another batch if they have done the tooling?
12
« on: June 01, 2024, 10:16:10 AM »
When we ran out Jeeps a WJ &. WK1 both were retro fitted with LED headlamp bulbs both passed the MOT tests at two different test centres. I later chatted with one of the testers about the issue, he said as long as they were white with a clear dip cut off it was not an issue. The Jeeps use an unusual style of bulb so finding good ones was difficult. I eventually found a pair of fan cooled units named oddly "Hogfather" they were much longer on the bulb body - luckily plenty of room on the WJ - they were in the Jeep when it was sold being over 3 years old.
13
« on: May 31, 2024, 12:05:44 PM »
In the summer Bryan we are a cosy 74-80 F in the lounge. Upstairs as the main outside walls and roof is super insulated (since our fire) we can regularly tip into 88 F so all the upstairs windows will be open if we actually have a summer this year!
14
« on: May 31, 2024, 11:07:45 AM »
I must be super nesh Dennis my minimum in the house is 71 F - 21.6 C, the Gaffer complains about it giving her hot flushes.
15
« on: May 31, 2024, 09:24:06 AM »
Just a thought might be coil side for CB, other side for Electronic..
|
Show Posts
