Honda-SOHC
SOHC.co.uk Forums => CB500/550 => Topic started by: GTB981 on December 24, 2019, 04:05:48 PM
-
Need a set of float bowl gaskets for my CB550K0 after renewing float valves. Where`s the best place ? Thanks, Geoff.
-
Same as 500, probably cheapest to get O ring kits from Gerben
-
Cheers, I`ll take a look.
-
What, as in a kit of O-rings ? when I searched I couldn`t see carb o-ring kits.
-
Is this the kit you're looking for?
https://www.ebay.co.uk/itm/CB500-CB550-4-Four-Keihin-carb-O-ring-set-VITON-rubber-for-4-carbs/113717285384?hash=item1a7a141208:g:R2IAAOSwb9BaqsJ9
-
I guess so, but only need the float bowl ones.
-
I used 68mm x 2mm Viton O rings. They were a tad big, but got them in the groove ok. Came off ebay.
-
Cheers for the dimensions.
-
Is 68mm O/D or I/D ?
-
Have had the float bowls off my carbs a few times, never renewed the gaskets and has never leaked, guess I'm lucky ?
-
Same here. The later model bowl helped.
-
Is 68mm O/D or I/D ?
68mm x 2mm is 68mm I /D x 2mm section, so is 68mm I /D x 72mm O/D.