Honda-SOHC
SOHC.co.uk Forums => CB500/550 => Topic started by: 1234pot on March 02, 2021, 06:11:40 PM
-
Can anyone point me in the right direction for a correct front right engine mount bolt and nut for a 500 K0. Finally got a few good days riding in and just checked everything over and it’s worked loose. Just left me with the spring washer. They don’t have any at Silvers or CMS
8mm x55 Hex
(https://uploads.tapatalk-cdn.com/20210302/7a7e1673a23f9837d9b1b30e0a4fef8c.jpg)
Sent from my iPhone using Tapatalk
-
Cheers Oddjob
Sent from my iPhone using Tapatalk
-
It is the lower front right I’m after
Sent from my iPhone using Tapatalk
-
I’m with you. On the schematic it doesn’t actually show the right hand bolt. Is it identical to the right hand one? Number 20(https://uploads.tapatalk-cdn.com/20210303/a8d69583cf13265c2482859be05d9ed1.jpg)(https://uploads.tapatalk-cdn.com/20210303/da346bc0ea2920e12329719aaabbcc0a.jpg)
Sent from my iPhone using Tapatalk
-
Sorry! Doubled up on that! I’ve just looked at the left mount and that needs tightening too....I need to get the threadlock out!!
Sent from my iPhone using Tapatalk
-
Good news is that Silvers do actually have that part in stock so I’m ok. Thanks for your assistance Oddjob, greatly appreciated.
Sent from my iPhone using Tapatalk
-
Number 22 in that diagram
-
I think Ive grasped it now. The corresponding bolts are 19 and 20.
Sent from my iPhone using Tapatalk
-
Phew!
Sent from my iPhone using Tapatalk