This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - Sesman
1
« on: February 20, 2024, 02:26:14 AM »
Thanks guys. I’ll try to upload some photos when I have a decent internet connection.
Just had a slap up meal and lots of beer. First time a meal has cost me over a million?
Lots of small Hondas here….but nothing over 90cc.
3
« on: January 24, 2024, 04:48:09 AM »
Some fish….
4
« on: January 22, 2024, 11:20:05 PM »
Now, Ken. That’s where a croc tried to get on😁
Calm before the storm…..
5
« on: January 19, 2024, 12:04:37 PM »
Airlie Beach.
Racing to Vietnam commences on Monday.
Fair winds! Which boat is yours?
Qingdao…..the big red un with. Dragon painted on it. Not to Menno’s standard.
6
« on: January 18, 2024, 03:23:39 AM »
Airlie Beach.
Racing to Vietnam commences on Monday.
7
« on: January 18, 2024, 03:20:55 AM »
Hi, Dave. Yes bay Gardens, Raffles Long Bar, Little India and Little China and Marina Bay Building tower No1 for a very expensive beer or two.
8
« on: January 17, 2024, 07:53:36 PM »
Cairns
9
« on: January 17, 2024, 07:48:00 PM »
Some members expressed an interest in following my travels.
Singapore….
10
« on: January 08, 2024, 01:27:02 PM »
For clarity, the attached is bollox?
https://motorcycleproject.com/text/brake_ills.html
For clarification
On the 500,a nylon washer which fits between the pad and piston is often included with new pads
But what it does is a mystery,
So does the 550. I’, gonna give the recommendation a try using thin s/s sheet with corrugations.
I tend to find, the harder you use the brake, the less squeal you get
Sent from my SM-A546E using Tapatalk
11
« on: January 08, 2024, 10:56:03 AM »
12
« on: January 07, 2024, 08:35:55 PM »
Did I read somewhere that the solution to stop brake squeaks is to shim the piston/ pad? Maybe a myth…
13
« on: January 01, 2024, 11:50:33 PM »
Testing at 500v is just to test final circuit cable insulation . Don’t test the actual appliance at 500V
14
« on: December 29, 2023, 07:23:47 PM »
Photo required for confirmation, but probably yes. No, you can’t reuse the pin!!!
Yeah, I said what can I use to re-pin. Here's the photo I meant to upload.
Oops, sorry Dom. must get some new specs. Plus one on what Ken has advised…eg dog point screw.
15
« on: December 28, 2023, 09:24:33 PM »
Photo required for confirmation, but probably yes. No, you can’t reuse the pin!!!
|