Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Bryanj

Pages: 1 [2] 3 4 ... 664
16
CB350/400 / Re: 1975 CB400F Rear Tank Rubber
« on: March 22, 2024, 08:09:53 PM »
No just the weaker ones!!!!!

17
CB750 / Re: Regulator Rectifier
« on: March 22, 2024, 04:57:28 PM »
Just cleaning the "pip" off shouldnt alter much if anything

18
CB500/550 / Re: Broken valve tappet covers
« on: March 22, 2024, 12:04:10 PM »
No chance of any connection with missfire

19
Other Bikes / Re: CL350 ENGINE NUMBER
« on: March 21, 2024, 07:52:13 PM »
Hopefully part of page attached

20
Misc / Open / Re: Stop/Tail light issue....electrical genius needed..
« on: March 21, 2024, 01:24:24 PM »
Somewhere the brown wire to the tailight is connecting to a black power lead in the loom OR  the ignition switch is faulty putting power to the rear light in on position instead of park position(or as well as).
Long distance electrical diagnosis is damn near impossible, with it in front of me could be a 10 min fix or a 2 hour chase!

21
Misc / Open / Re: Fingers crossed....
« on: March 21, 2024, 01:00:35 PM »
I think its 1/4 whit that is a hammer on fit to worn 12mm, still have one in my toolbos---somewhere---(tool box that is!).
The original 750 housing was round with no fins and was reatively quickly superceeded because of cracking

22
Misc / Open / Re: Barn find!
« on: March 21, 2024, 11:33:18 AM »
AF you are hopefull, it will be Whitworth

23
CB350/400 / Re: Engine rebuild Parts list
« on: March 20, 2024, 09:18:31 PM »
Sometimes they work sometimes not, i bought a bag of 6mm alloy washers off fleabay, about 75% efective so sometimes need replacing but that is not a horrible job

24
Other Bikes / Re: My Goldwing
« on: March 19, 2024, 08:43:02 PM »
Ford are finding to their cost that "lifetime" aint very long

25
Misc / Open / Re: Fingers crossed....
« on: March 19, 2024, 08:40:32 PM »
There are copper looking washers under 2 head nuts on the 400 and 4 on the 750F2 if my memory is correct

26
Other Bikes / Re: CL350 ENGINE NUMBER
« on: March 19, 2024, 10:07:43 AM »
I will look in my US id book when i find it

27
Recommended Sources for Parts and Services / Re: Felt seals for CB450K
« on: March 17, 2024, 07:04:44 PM »
Ken was making them for 400/500550 carbs, not sure about 450

28
Misc / Open / Re: cost of speedo calibration.
« on: March 15, 2024, 09:16:27 PM »
According to c&u must be accurate to 10% but now only allowed to read high not low

29
SOHC Singles & Twins / Re: CB250 MC26 help
« on: March 15, 2024, 08:34:35 PM »
Looks like a bigger version of the 125 twin from the 80's or maybe the CD 250U

30
Misc / Open / Re: cost of speedo calibration.
« on: March 15, 2024, 08:32:05 PM »
If the front wheels are the same diameter the drive box will be the same, is this Suzuki GT or Kawasaki GT

Pages: 1 [2] 3 4 ... 664
SimplePortal 2.3.5 © 2008-2012, SimplePortal