This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Topics - Alimacdee2
Pages: [1]
1
« on: May 02, 2022, 10:34:49 PM »
Hi all, decided to take the plunge and give the Honda a teardown and address a few issues, fix a dog in the sump pan 4th Gear countershaft sprocket 34T, (didn't affect the gear change, broke off cleanly), will replace the crank oil seal(was cured with a red heat proof unlipped seal & THREEBOND 1184, do the mains shells, a few are scuffed, crank mains looks fine and seems to measure unworn, all those 1000 mile oil changes worked. I've left the crank pins on for now, they seem nice with just a little side to side play, and are tight up and down. Might do them, the primary chains measured 66.43 so ok, the engine was running good, but seeing debris off of the cam chain tensioner wheels, these are original , I'll change the Guide and wheels and chain while I'm in there. enjoying seeing out how little wear is on the engine, seems the camshaft has a bit of wear mainly on the lobs.
the crank pins shells have only done about 34,000 35 on the bike since they were done back in 1990, the invoice for that work has some useful info on it
cheers
Ally
2
« on: March 01, 2021, 02:19:05 PM »
Hi all, looking for a second opinion, sorry haven't been on here in a while, too many distractions, need to focus more on what really matters.. having said that.. I was rear ended at a busy roundabout Friday 1.40pm, my previously perfect Rear mudguard and No plate Holder took the brunt, the Points cover mashed, Right hand brake leaver bent at end, front brake binding so probably the pivot bolt. very slight scuff to my brake lever pedal, and slight scuffing to my aftermarket exhaust. Overall very lucky considering the shunt was quite an impact! the good news my handlebars seem unaffected! my first accident in many a year, 24yr old female driver is willing to pay for the Damage seems genuine, this will save going through the insurance, It looks like all the parts are available except the rear fender and no plate holder which are UK spec, and which I'd like to retain. I wonder if its possible a Good panel beater could sort the Mudguard and plate holder?is there one? its always been a road going bike I want to stay this way, I did take lots of photos at the scene of accident but I'm reticent to publish these at the moment, I'm still talking to the Driver of the car.
cheers Ally
3
« on: December 22, 2014, 02:33:53 PM »
Hi all,
Was changing the oil and filter today, and had a look in the sump pan, found this piece of metal, thank you Santa....been over 20,000mls since I last had a look in the sump, was expecting some residue in there, looks like there's black bits off the camchain guide, and some small bits of metal, not many, and this chunk of metal which looks sheared.
The bikes running and starting fine, though there has been an on off rattle, low down at the front of the engine, seems to have gone.
Any ides what this chunk of metal might be? and the prognosis? dreading this... part of the tensioner assembly?
Ally
4
« on: November 24, 2014, 08:54:20 PM »
Hi all, thought I'd give the forum a try, I'm trying to double check the timing on the Honda with my trusty old tachostrobe, I can get the Gunson's universal spring connector on no 1 or 4 spark plug no problem, without it shorting on the head, but now finding it impossible to get it on 2 or 3, this connector has always been a pain to use, I think its more suited to a distributer cap, anyone know a more reliable connector I could convert it so its sohc friendly? Ah the joys of points ignition, its all coming back!!
Ally
5
« on: November 21, 2014, 11:23:15 AM »
Looking for CB750 OFG17H always regretted selling this one, wondered who has her now? Purchased from Dealer Sandy Bloy Motorcycles Bridge of earn 1978 in immaculate condition for £1000!
Ally
6
« on: October 25, 2014, 04:16:05 PM »
Hello fellow sohc owners,
I joined last year, but never did say hello, hope I can stop being an occasional lurker! and make some posts now...I was a member on the US site a good while ago, I thought I'd make a new start now on the UK one. I own a 1970 CB750 owned 26 years, its been on the road last 18 of those, has been very reliable apart from X2 aftermarket electronic ignitions, boyer bransden lasted 7yrs, DS sytstem 15mths! suffice to say it now has the reliable points back on! so looking forward to advice and comments.
cheers
Ally
Pages: [1]
|
Show Posts