This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - waffey
Pages: 1 ... 9 10 [11] 12 13
151
« on: December 18, 2018, 07:10:13 AM »
Hi Sprocket,
I've stripped my Honda down over this year and took a picture or two.
I'm more than happy to send them all to you on a CD. They prove useful.
PM your address and i'll post.
152
« on: October 15, 2018, 12:17:12 PM »
PM sent to see if the tubes are available still
153
« on: July 04, 2018, 11:31:20 AM »
its hollow, that's why I didn't beat the hell out of it!!!!!
154
« on: July 04, 2018, 07:22:08 AM »
I cant afford to get the bike to 'as mr Honda made' condition but I do intend to get it to look like it is from a showroom. I'll go with the solid bar and be done with it 
155
« on: July 03, 2018, 07:21:05 AM »
OK ODDJOB, i'll try that. I assume I can purchase a new tube easily?
156
« on: July 01, 2018, 10:10:19 PM »
ok, so mine is pretty much rusted together. i'll soak for a week and see if I can drift it out. there is so much crud on it I wasn't sure if it had some tack welds
thanks for the help
157
« on: July 01, 2018, 04:55:07 PM »
Hi,
last job for stripping the Honda is the centre stand. I've removes the spring, split pin and undid the bolts but I cant see how can remove the centre stand. Can someone give me a clue please
Thanks
158
« on: June 02, 2018, 09:51:28 PM »
It could be the camchain shaving lumps off the camchain tunnel. What does the engine sound like?
I never had it running, it turned over fine and it tried to start.
159
« on: June 02, 2018, 04:43:55 PM »
Hi
I took the sump off today so I could final remove the engine from the frame. I found these little buggers in the oil pick u filter. Does this mean a full engine rebuild?
160
« on: April 30, 2018, 07:22:02 AM »
Looks superb, it only spurs me on to get cracking on with my little 400 (same colour)
161
« on: March 14, 2018, 09:44:19 PM »
I'll probably purchase new stanchions from davidsilver spares.
lower forks not sure yet whether to fill and polish, fill and paint or live with the deep marks
162
« on: March 12, 2018, 06:41:18 PM »
Hi and welcome. I'm fairly new here the advice and help here is great.
163
« on: March 12, 2018, 06:37:58 PM »
thanks nurse Julie. see the picture of one fork tube, it has some deep marks in it. Do you think they will polish out or do they need filling first with?  and then polished. I've tried uploading an image but I get an error (it meets the criteria)
164
« on: March 11, 2018, 02:20:38 PM »
all off now.
first issue is one bottom fork leg bolt is spinning around. any solutions out there? (don't forget i'm a newbie to this restoring/heartache lark)
The other fork leg is tripped but the bottom for is badly marked. I tried soem wet n dry. Question is do i continue with wet n dry or take it to some polishing firm?
165
« on: March 11, 2018, 09:28:09 AM »
thanks nurse Julie
Pages: 1 ... 9 10 [11] 12 13
|
Show Posts