The bolt is part 29 with the nut 15 inside the airbox, at the top 29 and 14.
Part 17 goes to the outlet you marked as 3 and just dangles, it should have a closedish end with a split so you can squeeze it and drain moisture.
Breather goes from top of ending to one of the bottom connections but cant remember which or ehere the other goes.
Yes you can blank the holes, remove the gubbins from inside and use a 500 air filter
Hi Bryan,
I think I have eventually taken you advice ( I think you advised this in a previous post)
Just looking a little more advice if you don't mind?
1. Block off ports as circled in yellow?
2. remove gubbins from inside ( marked in yellow )
3. Insert cb 500 air filter.
Is there anymore adjustments to do?
Have you got a year or part number for the air filter? I don't want to buy the wrong one?
Also I have the original PD46C carb.......fully cleaned and set up with original jet sizes ( main 90, slow idle 42). Do you have to make any changes to carb?
Sorry for all the questions...I am new to trying to sort out my own mechanics etc
Cheers
Brian
[ Guests cannot view attachments ]