This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - Athame57
Pages: 1 2 [3] 4 5 ... 78
31
« on: April 10, 2024, 07:30:41 PM »
Is Simoniz Engine Enamel considered the best paint to get?
32
« on: April 10, 2024, 11:09:33 AM »
I don't want the cylinder liners to move while in the oven...on the K7 the head is bolted to the cylinders with M6 bolts and I was going to do that and place it right way up in the oven...so the tops of the liners are against the cylinder head...
Would that work folks or is there a better way?
Hubert
Surely this is the very hottest part of the engine and as such a few hours of riding might do the job okay?
33
« on: April 10, 2024, 01:06:31 AM »
Welcome back Tim, nice to meet you! 
34
« on: April 07, 2024, 02:50:29 PM »
Didn't the Yamaha EXUP have a similar system at one time?
Just took a look at one on the web. Those two round intakes with tubes...... I remember one at Boxhill ( Biker haunt ) someone asked the owner 'now what does this do apart from making the fairing hard to take off'?
35
« on: April 07, 2024, 02:43:48 PM »
Honda started manufacturing them in 1974 George.
Thanks Julie
36
« on: April 07, 2024, 12:23:27 PM »
For a few months I rode a GT380, the only air cooled two stroke I ever had. Anyone got an opinion if it made any difference or was it just a gimmick? 
37
« on: April 07, 2024, 11:42:20 AM »
One thing has me wondering though, the 50th anniversary of the CB400F is in 2025, why a year early? Is Diane Abbott on his staff?
38
« on: April 07, 2024, 02:07:52 AM »
Might go and enter the longest time 400/4 bits left in boxes.......
I know what....book a spares stall for the Autojumble!
39
« on: April 06, 2024, 10:24:30 PM »
I think I'll be going to this!
40
« on: April 06, 2024, 05:17:14 PM »
I bet that sail....I mean front fender number plate was fun in the wind we had today!
41
« on: April 06, 2024, 10:00:21 AM »
Are you talking about the riders footrest that stays up to enable the kickstart to be used?
Isn't the loop part of the spring mechanism that holds it up?
This is the one, can't figure it out!
42
« on: April 06, 2024, 09:57:23 AM »
Part numbers 11 and 19 were not fitted to the UK bikes.
AAHHHH....SSOOOOO!
43
« on: April 06, 2024, 07:42:34 AM »
What does that loop on the right footrest assembly actually do?
44
« on: April 05, 2024, 11:39:21 PM »
The link takes me to part 11, listed as wiring. No parts to scroll down to
Also called Stay, horn. Diagram shows it holds horn forward 
45
« on: April 05, 2024, 11:10:49 PM »
Its not a horn stay, its a bracket for the loom
I think you mean what they call the 'wiring harness stay? That was also missing, long since replaced ( I opted to paint it myself) If you scroll down the linked page you'll see what I mean by horn stay.
Pages: 1 2 [3] 4 5 ... 78
|
Show Posts