Honda-SOHC

SOHC.co.uk Forums => CB750 => Topic started by: davefirestorm on March 23, 2020, 12:24:03 PM

Title: F1 seat cowl
Post by: davefirestorm on March 23, 2020, 12:24:03 PM: [attachimg=2]Having tank/seat cowl resprayed and the trim at the end of my cowl needs replacing.Any ideas where I can source a new one or make a new one?[attachimg=1]
Title: Re: F1 seat cowl
Post by: Nurse Julie on March 23, 2020, 02:23:57 PM: Is it metal or plastic and how deep is it?
Title: Re: F1 seat cowl
Post by: davefirestorm on March 23, 2020, 06:20:25 PM: It’s plastic Julie and it’s 8mm deep.😁
Title: Re: F1 seat cowl
Post by: Nurse Julie on March 23, 2020, 06:32:35 PM: Quote from: davefirestorm on March 23, 2020, 06:20:25 PM
It’s plastic Julie and it’s 8mm deep.😁
OK Dave. I'm not sure if it would be any good but I sell tank trim for CB500/4's which is plastic, silver, 9mm deep with self adhesive glue stuff up through the middle. It may be an option if you can't find anything more suitable. I will PM you over a couple of pics.
Title: Re: F1 seat cowl
Post by: davefirestorm on March 23, 2020, 08:52:27 PM: It isn’t complete ie has cracks in it
Title: Re: F1 seat cowl
Post by: Redders33 on April 18, 2020, 08:54:16 AM: Hi Dave I need the same part so if you have any luck let us know please.
Title: Re: F1 seat cowl
Post by: davefirestorm on April 18, 2020, 10:00:34 AM: Will do Redders.Julie has sold me a bit of trim which is not as wide but hopefully do job,I haven’t got my cowl back yet from painting.Have tried every where to get one😁
I’m also looking for the rubber pieces that fit to the rear of the cowl if anybody has one👍