Honda-SOHC

SOHC.co.uk Forums => CB750 => Topic started by: philward on July 10, 2015, 11:09:44 PM

Title: K2 Front Brake Hose routing
Post by: philward on July 10, 2015, 11:09:44 PM

Hi again everyone
Just starting to fit rhino horn top yoke and refurbed carbs and occurred that I might have to disconnect top brake hose if it has to go through the centre hole in the top yoke. Prefer not to go through the bleeding brake again but if I have to, so be it. Or does it route to the right of the yoke under the rev counter? I've viewed images on line but the route varies - whats the correct routing?
Thanks
Phil

Title: Re: K2 Front Brake Hose routing
Post by: mick on July 11, 2015, 08:15:19 AM

Hi Phil mine goes through the hole in the middle  ;)

Title: Re: K2 Front Brake Hose routing
Post by: philward on July 11, 2015, 09:44:50 AM

Thought so - so much for - 'it will only take me half an hour' - my misuse always says you always say that - and she's normally right!

Title: Re: K2 Front Brake Hose routing
Post by: Lobo on July 11, 2015, 02:38:32 PM

Hiya Phil,

Yup, Mick's already given the answer...I think they're K0 / K1 but the same for the K2... leave a guru to confirm.

Simon

Title: Re: K2 Front Brake Hose routing
Post by: philward on July 12, 2015, 08:15:48 PM

Thanks Simon - I've left mine to the right of the top yoke for now and will re-route this winter. Wanted to get out on the bike this weekend so went for the easy option.
Phil

Title: Re: K2 Front Brake Hose routing
Post by: Bitsa (Ralph Wright - RIP) on July 13, 2015, 09:25:01 AM

Dont blame you ride it all you can mate
Cheers
Bitsa