Recent Posts

Pages: [1] 2 3 ... 10
1
CB750 / Re: Yhc-184 regulator rectifier
« Last post by SteveW on Today at 11:03:17 PM »
Ages since I wired mine in but from memory they go back to the white and green on the exciter coil. This was on my 550 K0.
2
CB500/550 / Re: top end gasket set recomendations
« Last post by Bryanj on Today at 10:49:26 PM »
All head gaskets are now thicker than Honda original due to no asbestos used in manufacture but the suppliers still give you the original size O rings so they dont seal as well.
If you go to the US site and look up Mark Paris (Hondaman) he can sdvise on size, i dont have all my books to hand
3
Humour / Re: MBE
« Last post by Johnny4428 on Today at 10:09:48 PM »
🤭🤭😂
4
Humour / Re: MBE
« Last post by Athame57 on Today at 10:04:35 PM »
Quote from: Johnny4428 on Today at 09:46:44 PM
That would give him something to “crow” about!
::) You deserve the bird!  ;D
5
Humour / Re: MBE
« Last post by Johnny4428 on Today at 09:46:44 PM »
That would give him something to “crow” about!
6
CB500/550 / Re: top end gasket set recomendations
« Last post by Mike_Berkshire on Today at 09:19:12 PM »
Quote from: Bryanj on Today at 07:05:59 PM
No matter what set you need thicker O rings at the headgasket than those in the set
Does this apply to all gasket sets Bryan or just relating to this particular model? I will be putting the top end back together on my CB550 in the next month or 2 and it would be good know if I’m going to need to source some different O rings.
7
Project Board / Re: Teds new project a CB500 K1 mostly version 0.5 circa 1972.
« Last post by Bryanj on Today at 08:55:55 PM »
550 and 500 same shape but later ones had a connector bit, the screwed in retainer does not have a seal, only the big tim pressed plate
8
CB750 / Re: Yhc-184 regulator rectifier
« Last post by Bryanj on Today at 08:54:08 PM »
If the people who made it, or those that sold it didnt give you a wiring diagram in my opinion it aint worth using
9
CB750 / Re: Yhc-184 regulator rectifier
« Last post by McCabe-Thiele (Ted) on Today at 08:37:29 PM »
Exactly that's why I stayed with the original seperate units - Im chicken! ;D ;D ;D
10
CB750 / Yhc-184 regulator rectifier
« Last post by Pauarc on Today at 08:14:46 PM »
Has anyone wired up one of these need to know where the white and black wire go
Pages: [1] 2 3 ... 10
SimplePortal 2.3.5 © 2008-2012, SimplePortal