Honda-SOHC
SOHC.co.uk Forums => CB350/400 => Topic started by: allankelly1 on August 13, 2020, 05:45:36 PM
-
Hi all
Got some new carb intake rubbers and just noticed thar the carb bore to cylinder head bore has are offset slightly
Does anybody know please the correct way round the rubbers go as I guess the off set to to allow the carbs to line up correct with the rubbers
Any help most welcome
Best wishes Al
Sent from my iPhone using Tapatalk
-
They should have numbers on them
-
Do you mean this?
http://www.sohc.co.uk/index.php/topic,17459.msg149721.html#msg149721
-
Im sure when i did a set they had 1-4 and 2-3 in the rubber
-
Im sure when i did a set they had 1-4 and 2-3 in the rubber
Hi
Thanks for all the tips
Yes I think the Honda ones do but these are Dave Silver after market parts and have no numbers but think from all the tips I can now suss it out
Again many thanks to all
Best Al
Sent from my iPhone using Tapatalk