Honda-SOHC

SOHC.co.uk Forums => CB350/400 => Topic started by: Andrewd2667 on January 23, 2017, 11:21:48 AM

Title: Recommendations on Engineers for Re-bore/ Head skimming/ Valve seats/ Cleaning
Post by: Andrewd2667 on January 23, 2017, 11:21:48 AM

I would greatly appreciate if anyone can advise/recommend on engineering services in (Hertfordshire would be ideal) to do the following on the CB400

1. Re-bore and honing -
2. Head skimming
3. Valve seats / valves lapping
4. Cleaning - Vapour blasting

The picture is of the guilty piston - it must of had a hard life.

Title: Re: Recommendations on Engineers for Re-bore/ Head skimming/ Valve seats/ Cleaning
Post by: Laverda Dave on January 23, 2017, 11:50:10 AM

Even though I live in Middlesex I use J D Autoworx in Wallington, Surrey.  Highly recommended, they did a lot of work on my 400/4.

Title: Re: Recommendations on Engineers for Re-bore/ Head skimming/ Valve seats/ Cleaning
Post by: Trigger on January 23, 2017, 07:22:12 PM

Quote from: Andrewd2667 on January 23, 2017, 11:21:48 AM

I would greatly appreciate if anyone can advise/recommend on engineering services in (Hertfordshire would be ideal) to do the following on the CB400

1. Re-bore and honing -
2. Head skimming
3. Valve seats / valves lapping
4. Cleaning - Vapour blasting

The picture is of the guilty piston - it must of had a hard life.

Try T&L Engineering up the road from you in Bedford.