Honda-SOHC
SOHC.co.uk Forums => CB650 => Topic started by: tosh on September 25, 2017, 06:59:52 PM
-
Finally got round to fitting new piston and seals in each calliper but I've found that on both sides the wee spring clip that passes through both retaining rods and over the shim are missing.No 3 in the diagram .. I can't find replacements anywhere inc Dave silver! My question is are these vital as I'm assuming they have been missing for many years ? :-\
-
Do you have a part number ?
-
I think it is 45223425003 I've found them on Cms but the shipping is twice the price one 2 clips
-
From memory the ends go through holes in the pins to stop them sliding out, small "R" clips should do the same job, thats what a lot of cars use
-
I think it is 45223425003 I've found them on Cms but the shipping is twice the price one 2 clips
seem to be available everywhere >>> http://www.wemoto.com/parts/picture/ho-45223-425-003/
-
Yea just rang them and they can't get them as discontinued by Honda just haven't taken them down yet same story most places
-
Found a used one, but it's in the U.S. E-Bay number 362110555093
-
From memory the ends go through holes in the pins to stop them sliding out, small "R" clips should do the same job, thats what a lot of cars use
It has the R clips at the other end but the side in question has domed heads on the pins and I'm not sure what the purpose of the clip is, as it just seems to hook over the shim from what I can make out so maybe anti vibration??
Thanks Hairygit I will have a look
-
Bliming heck, seem to be running out of stock. Here is a new one, I would buy this and make another with a bit of the right size wire.
http://www.ebay.co.uk/itm/NOS-Honda-CB650-CB750-Front-Caliper-Clip-OEM-45223-425-003-/192029374633?hash=item2cb5d7b8a9:g:7rgAAOSwHMJYLNtG