Honda-SOHC
Other Stuff => What is it? => Topic started by: Beemer634 on July 07, 2009, 10:55:26 PM
-
Hi
I have a pair of side panels I bought but then discovered that one of the lugs appears to be 90 degress out. Firstly I thought it had been tampered with but there is no sign of any disturbance to the lug.
Does anyone know of a SOHC model that these could be from? They will be heading back to EBay as soon as I find out!
Thanks
Rick
-
Cant tell without pictures!!
-
What bike are they supposed to be for? and what year? might give us a bit of a clue to start with ;) cheers Mick.
-
Damned computers, they never write what you want to say!!! Besides, I attached 2 pictures but they never appeared!
I bought the panels hoping they would fit my 750/4 K5, if I remember correctly they were advertised as 750/4 but gave no model.
Thanks for your help.
-
They are from a 500 or 550. Are there any numbers embossed into the back?
323=500
404=550K3
If no numbers then they are not OEM and are aftermarket replacements.
-
Just checked my 500 (original)
The two top lugs should be "spade" shaped and orientated horizontally.
The lower lug is round.
-
lokk a bit like 550 k3 but not 100% sure
-
Looking at the badge holes I would also say it's a K3. The F1 and F2 had transfers on the panels.
-
F1 and F2 had different-shaped panels Dave (smaller)
-
They are marked 404, so from what has been stated already they are from a 550, thanks so far, but was there a 550 with one vertical and one horizontal lug?
I am tempted to cut, insert a length of stud and resecure for them to be both horizontal. They are destined for EBay anyway.
Thanks again guys.
-
Thats how the 550 K3 was, they are as original except for colour, last original pair i had, with emblems and stripes, sold for