Honda-SOHC

SOHC.co.uk Forums => CB350/400 => Topic started by: Integra99 on October 31, 2017, 11:52:02 AM

Title: Gear lever.. play ? cb400
Post by: Integra99 on October 31, 2017, 11:52:02 AM

A quick update... had this bush and washer made up.. lovely job!

(http://www.dotheton.com/gallery/107242-311017064404.jpeg)

Title: Re: Gear lever.. play ? cb400
Post by: GiannisFour on October 31, 2017, 04:31:58 PM

Hi
having the same problem,nice job you did! can you give more details?
thanks

Title: Re: Gear lever.. play ? cb400
Post by: mike the bike on October 31, 2017, 06:26:58 PM

That's nicely done.  Thanks for sharing

Title: Re: Gear lever.. play ? cb400
Post by: Integra99 on November 01, 2017, 11:33:25 AM

Yes we took about .2mm from the shaft so there was less to take out of the selector , the problem was the selector had worn in an oval shape and it was better to reduce the shaft dia a little to compensate, I had help from a friend who repairs steam engines so a few cups of tea and sorted, we made a washer either side and all held in with a split pin..  there was so much play in it before, gear changes will be much better now!