Honda-SOHC
SOHC.co.uk Forums => CB350/400 => Topic started by: watty51 on November 18, 2017, 01:57:14 PM
-
When measuring the height of the floats what sort of angle would the carb bodys need to be at for the most accurate level.
I have done some research....some say upside down....some say 90 degree....some say 45 degree.
Any ideas
-
I've always measured them on the side with the float tang just touching the needle of the inlet valve. Make yourself a float gauge to set the correct height. There's plenty of threads on here about 400 carbs and float heights.