Honda-SOHC
SOHC.co.uk Forums => CB500/550 => Topic started by: paulbaker1954 on March 26, 2018, 04:39:58 PM
-
Just had a bit of a root around the garage and I have the following available if anyone is interested pm me
1) Full 500 four clutch , good plates in spec, springs, basket, lifter, shim etc
2) Two aftermarket coils CML612 units.They are 5 Ohm primary and 17 Ohm secondary. I bought them last year but never used them as I ended up going full Boyer kit
3) Two original coils working but worn. The outer ht coverings are a bit brittle and have cracked at the entry to the coils but they do work fine
4) Another contact has an original NOS K0 seat in mint condition. Apparently they are as rare as hens now. I can put you in contact here if anoyone is interested
PM with a sensible offer if anything is of interest. They are all on fleabay but rather a forum member benefited
-
Interested in the Seat Paul.
-
Ash beat me to it on the seat!!!
-
Ash beat me to it on the seat!!!
[/quote
Ha Ha like you beat me yesterday on the FB Bomber seat :)
-
-
Here’s are some pics of seat my contact is looking around 300. Is that reasonable for a mint original seat? I have no idea!,
-
I think I will pass on the seat thanks Paul so over to you James if you are still interested. They are really rare though but I think the 'dealer take-off' one I have already has more of a NOS look about it in the padded sections. Pretty sure someone will take it though with a bit of haggling if James passes on it too.
[attachimg=1]
-
well im gonna sling my hat in the ring.
if james passes ...let me know
-
Here’s are some pics of seat my contact is looking around 300. Is that reasonable for a mint original seat? I have no idea!,
Will pm you Paul. Interested.
-
Here’s are some pics of seat my contact is looking around 300. Is that reasonable for a mint original seat? I have no idea!,
Will pm you Paul. Interested.
James I have pmd you contact details. Let me know how it goes.
-
Will do, thanks Paul. Funnily enough I know him!!
-
Are the coils suitable for a 500 four? I'm after some new ones but don't have the money for new dyna ones. Also would i need 3 or 5 ohms?
-
Are the coils suitable for a 500 four? I'm after some new ones but don't have the money for new dyna ones. Also would i need 3 or 5 ohms?
Yes I bought these for my four but never used them
I am not sure on the 3 ohm or 5 ohm ? though I am sure greater minds than I can help
-
Are the coils suitable for a 500 four? I'm after some new ones but don't have the money for new dyna ones. Also would i need 3 or 5 ohms?
Yes I bought these for my four but never used them
I am not sure on the 3 ohm or 5 ohm ? though I am sure greater minds than I can help
Just found an earlier post from Ash a true guru who states that ideally primary needs to no no less than 4.5 ohms so these should be fine then