Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Integra99

Pages: [1] 2 3 ... 14
1
CB350/400 / Re: CB400f - My first ride..!
« on: April 12, 2018, 02:18:19 PM »

Exciting day.. tank is finished.. just need to add the pin stripes and decals!!

Almost done! Leaky carbs sorted.. float heights checked, new seals as the new ones had gone brittle so I suspect the problem along with some dodgy cheap fuel line I hadnt replaced!









2
CB350/400 / Re: Carbs Leaking
« on: April 05, 2018, 04:34:50 PM »
Thanks Andy, Gerben sorted me some, great price too!!

3
CB350/400 / Re: Carbs Leaking
« on: April 05, 2018, 01:59:35 PM »
Thanks all.. I think its the seals although I changed them with the rebuild .. but looks like it can be the only thing! I'll look the ebay contact up... I  just need the seals not the whole kit so hopefully he can do separately.

4
CB350/400 / Re: Carbs Leaking
« on: April 05, 2018, 09:38:05 AM »

It looks like the joint between the carb body..  its only when left on the side.. I guess the seals must not be doing there job.

Trouble is to get the seals I have to buy a complete kit.. !

5
CB350/400 / Carbs Leaking
« on: April 05, 2018, 09:07:21 AM »

Having ridden the bike a bit more.. I've noticed all the carbs have a slight leak.. I think this may be having left the tap on and parked on the side stand.

I'm sure the floats are good.. but as it happens on the side I wonder if the rubber gaskets are no good?



Any thoughts

6
CB350/400 / You Tube of the Delkevic on my CB400f
« on: April 04, 2018, 09:59:32 AM »

A few people have asked for a video of the Delkevic.. this was taken late evening so I have tried not rev too loud so as not to offend my neighbors too much and will get some better coverage, maybe put the go pro on!

https://www.youtube.com/watch?v=1bUE0R3J7ws

Video doesn't do it justice .. I had some work colleagues rather surprised when I roared up the road through 2nd and 3rd.. I think they excpected and old bike to chug along.. as opposed to sounding more like a modern sports bike!

The baffles are in.. but now its had a few miles on it on the over run she pops and cackles lovely and feels like a 70's race bike. I need a 90 front tyre, the 100 doesnt turn in well!

7
CB350/400 / Re: CB400f - My first ride..!
« on: April 04, 2018, 09:42:15 AM »

Ha yes its on ebay.. just to gauge interest.. ! Moving house and my sons racing has prompted me to test the water regrettably!

The rear light is from a Triumph 675..  I cut it down to 1/3rd size and it fitted pretty well!






8
CB350/400 / Re: CB400f - My first ride..!
« on: April 03, 2018, 02:25:14 PM »
Thanks all.. Giannis - hope all well, I will get some video of the Delkevic .. awesome!

9
CB350/400 / Re: CB400f - My first ride..!
« on: April 03, 2018, 01:45:43 PM »
just had a dry ride into town to the sandwich shop to get lunch.. got a lot of attention parked up! I need to get some video of the Delkevic!

10
CB350/400 / Re: CB400f - My first ride..!
« on: April 03, 2018, 12:36:04 PM »
Thanks mate.. yes this is true.. although I built this so its void its Honda build quality ! ha

11
CB350/400 / Re: CB400f - My first ride..!
« on: April 03, 2018, 09:27:03 AM »

Thanks Julie, yes it felt great and is parked right out my window at work today..! Number plate is now on.. I hadnt fitted when I took the photo as outside the house.. but sits neatly to the left of the chain on a little bracket.

12
CB350/400 / CB400f - My first ride..!
« on: April 03, 2018, 09:18:43 AM »
Its been a while, so many projects but finally got the last of the niggles sorted and felt confident for a run up the road and brought to work today!! , Will remove tank and rear guard ready for paint this evening and we should have a finished bike. The Delkevic at 9k sounds lovely.. but nice and quiet at 5k in 6th , gear change smooth..  battery charging nicely - felt so light compared to the Ducati!




13
Project Board / Re: CB400f Supersport Restomod... so far.
« on: March 20, 2018, 03:27:42 PM »

Cheers mate.. yes rims are 2.1 and 2.5 Excel rims. oversize spokes so had to drill the original hubs a little.

Some work since the last update.. finally up and running and MOT'd!  A couple of niggles then off to paint! And then the kickback show..






14
CB350/400 / Re: CB400f - Magnetic Coil
« on: March 16, 2018, 10:38:16 AM »
Thanks I have a spare centre coil I'll try that

15
CB350/400 / CB400f - Magnetic Coil
« on: March 16, 2018, 08:45:45 AM »

Well the CB400f has taken a back seat as I cannot get it to charge.. so after 12 months work I've set it aside for a couple of weeks as worn out.. I can see how people lose interest at 99% complete of a build!

So finally pulled into the workshop, everything checks out and appears as it should. Apart from the Rotor.. it doesnt seem to be magnetised.. which must have an effect. it was working before the strip down.. stator all ok.

Any ideas why this may be the case? I've never seen this before.

Pages: [1] 2 3 ... 14
SimplePortal 2.3.5 © 2008-2012, SimplePortal