Honda-SOHC
SOHC.co.uk Forums => Recommended Sources for Parts and Services => Topic started by: Bro550F on May 11, 2021, 04:58:42 PM
-
Can anyone recommend a good, accurate set of vacuum gauges to be used on a 550F2.
They seem to vary from about £35 to £200.
Or is anyone selling a set??
Cheers, Paul
-
Morgan carb-tune, had mine over twenty years, never any problems.
-
Sealy on ebay, not the chinese lookalikes
-
I'd second the Morgan carb-tune mine been excellent ;D
-
Ebay item 301927858737 nearest thing to genuine Honda workshop set i have found and whats more i bought a set a couple of years ago, worth thier weight in gold
-
Thanks for all your replies and suggestions.
-
Paul, you are quite welcome to use my set - home made 40 ish yers ago but served me well. They have fittings for the 500 (5mm screws in ali inlet manifolds) - don't know if they are the same for the 550
-
Paul, you are quite welcome to use my set - home made 40 ish yers ago but served me well. They have fittings for the 500 (5mm screws in ali inlet manifolds) - don't know if they are the same for the 550
Hi Phil, Thanks thats very kind of you. I'll bear that in mind. Not doing it yet, got a few other things to sort out (life gets in the way of our fun!!).
I'll be in touch ,Cheers
-
I also made this which does just as well, you do a pair at a time, then one from each pair together.
[attachimg=1]
-
Here's the set my dad made me - great set and of sentimental value as well!(https://uploads.tapatalk-cdn.com/20210512/e2699fb43e26cd7b21e63ad7431abd02.jpg)
Sent from my moto g(7) power using Tapatalk
-
I too like my Morgan Carbtune... but had to fix leaks where the hose connectors meet the transparent pipes... ::)
Got me an electronic gizmo in addition, featuring a tachometer which eases idle mixture adjustment...
[attach=1]
[attach=2]