Honda-SOHC
SOHC.co.uk Forums => CB500/550 => Topic started by: Raymond_Y on January 17, 2020, 02:51:02 PM
-
Can someone tell me what the difference is between a right hand and left hand tank badge on a 1971 CB500K0?
Many thanks
Raymond
-
From my experience very little - they are supposedly pre-bent to the form of the tank, but if you're just gentle / careful you can bend them by hand to suit (just be careful no to crack the painted infill).
-
Pre bent... As James says(https://uploads.tapatalk-cdn.com/20200117/09b2f4b94d0da07b368380d69466f58a.jpg)
Sent from my I3312 using Tapatalk
-
And the pins are in different places as they are handed.
Edit... Saying that, I haven't got a tank to hand to see if when you line the pins up with the holes, to see if the badges actually sit on the tank in the correct position. They probably do though.
(https://uploads.tapatalk-cdn.com/20200117/6fab8274eda157049f57dd7044559e6f.jpg)
Sent from my I3312 using Tapatalk
-
Like so(https://uploads.tapatalk-cdn.com/20200117/3c1482e6fd6d43a48fc7d0aa5f31789d.jpg)
Sent from my I3312 using Tapatalk
-
Thanks
-
Not sure if this helps, but it shows the emblem orientation on my CB750 K1 tank:
-
For a long time in the 70,s a lot of the big Honda parts suppliers like Fowlers, Padgetts, Bill Head etc only stocked the one part number and used to tell us re shape it to fit
-
Both my 750's have the same part number Honda badges just bent to sute.
-
Both my 750's have the same part number Honda badges just bent to sute.
Interesting, DS and the parts book both list them as handed with sequential part numbers. My K1 originals are handed too.
-
Andrew-S, that was why I asked the question. I had noted the different numbers, but cannot see any difference between the two I have, other than the the possible difference in curvature.
-
Both my badges 750F have same part number just bent them to shape.What keeps them in place on the tank? Rusty bits of some kind of retainer were on the badge pins,suppose I could just glue them in
-
Difference in curvature is the only difference as far as i know