Honda-SOHC
SOHC.co.uk Forums => CB750 => Topic started by: Lobo on August 29, 2020, 09:32:46 AM
-
Hi all,
Working from a rather old CB750 shop manual, which frustrating is devoid of (any) torque values.
Does anyone out there have a nice every nut’n’bolt’ table of CB750K torque settings; specifically tonight, I’m after the swing arm pivot nut setting. Next up is changing the rear wheel bearings - so any known values there appreciated too. (eg sprocket fastenings). And next the front forks & wheel bearings.... pinch bolts, disc nuts... the whole shebang.
My elbow is indeed fine for the generic stuff, but hey, if there’s a correct value I’d appreciate it.
Ta muchly.
Simon
-
Got these from my F2/K7 Manual, hope these are some help until an expert arrives
(https://imagizer.imageshack.com/img922/8342/dBisqw.jpg)
(https://imagizer.imageshack.com/img922/5981/dYvYdz.jpg)
Cheers
Dennis
-
...perfect.
Thanks Dennis
-
Just DONT use the torque for the 6mm in alloy
-
Thanks Bryan... appreciate the Honda alloys have a lot of butter in them!
-
They didnt when new but old age weakens us all!!
-
Stiff in all the wrong places mate, but too weak to undo what used to be easy