Honda-SOHC
Other Stuff => Member 4 Sales => Topic started by: Oddjob on August 24, 2022, 09:25:34 PM
-
I've managed to source some shims in order to shim the clutch basket out so it has very little play.
The genuine Honda shims, 90458-323-010, 90459-323-010 and 90460-323-010 are 0.1, 0.3 and 0.5 respectively. They are hard to find and when you do find them they tend to be expense for what they are. The cheapest 0.1mm shim is currently £23.80, a 0.3mm is £23.64 and a 0.5mm is £20.19
https://www.ebay.co.uk/itm/403800935092?epid=20005555246&hash=item5e04694ab4:g:bIAAAOSwq3Zi4bJE&amdata=enc%3AAQAHAAAAoAXmynROe1KCu8%2Be6E4GFvE88e%2BHwTD8YdWo7TFMQuIdKgvCmcNoFDkr%2FiNJ9BTpb46D0EXVroLORNRQ3LWcGPDtfbO2VY0ogmz2GMLP7GsEKW%2F0V55ifNKcfVxLqW9qwBtyp9VQq7pa8m3g9rDiwaoJ0YVzCzkd19Bclabq8mk8wQAQ%2BBPUc96h8FcIb8ve35ql1P5%2Bk0Yv%2Bt6KIUkWOYc%3D%7Ctkp%3ABk9SR46g_5faYA
https://www.ebay.co.uk/itm/154083052710?hash=item23e010cca6:g:AZoAAOSwnB1fW3IW&amdata=enc%3AAQAHAAAA4LsiKS6JObfinNs1ffunbtQIPLmfQTvsolvjBq9cILXC1W0pzTdVAmEloS8%2BFR2aoTHX3tbfMd7zSKFtpQib6NXSoF0SgdZOgEzOCwEcKTFX4cpf2e7zM4mz13Eh%2BvK9OiBjePKS8bkXBy1s5KLOj%2FX3A6FoPFIMO8GYTGiN6tyDPYrfjnL3Jnx1qeHBLCuHL7Bog4jIZxDwKAJ1BBRcAWVcSejfOfXu1nJL2rkUrUztrOGPgOtjHitYP38taxiWgYn3MiSpQrA1RJlbG8I6wGmFeiLsQ9jGG4mBma%2BA%2F0RQ%7Ctkp%3ABk9SR4if-ZfaYA
https://www.ebay.co.uk/itm/284378477244?epid=1223272257&hash=item42364732bc:g:imoAAOSwCCVg9uo4&amdata=enc%3AAQAHAAAAoBv2XBw5BJOd6R1JByrstXM5G2CYGYBia%2FnkKc8tDpBN4tD2y9g1GL6j6%2FdWDxBsUaBjIuGhdUPKlh%2FM2wexD88pT9XF1tWszdzrgH8iVkXSjgD3xLOY1qcPIqcjtTY%2BWrL%2Fy0H9H%2BJ2UsHRGJdmioIBWIDotIuvVBuIPT7EY3ebgbuK7493vRpInISFNfQAxdD4R41RXIuN42GY75srMqI%3D%7Ctkp%3ABk9SR4K6gJjaYA
The problem is you don't know exactly how many you're going to need, it could be one 0.1 or 2 x 0.1 or 1 x 0.3 etc.
So I've decided to sell them in a set, mine are 0.1, 0.2 and 0.5. So almost the same. If the set consists of 2 x 0.1, 1 x 0.2 and 1 x 0.5mm then you have enough to shim out to 0.9mm and if you've got that much play you've got bigger problems than a lack of shims.
Mine are also stainless steel so unlike the genuine Honda shims they won't rust sitting in a box if you find you don't need them all.
I have to alter these shims when they arrive because the are not the right size, the inside is fine but the outside is too large to fit inside the inner clutch basket, the alteration is not easy TBH and after doing these I doubt I'll do any more. Hence the price for a set is £12 inc P&P.
I have 10 sets ONLY. Any that don't sell will go on Ebay for £15.
First come, first served. Don't PM me, if you want any post here.
Oh and in case you're wondering where they go, they go behind the circlip that holds the inner basket in place. Fit a circlip and see how much the basket slides out along the shaft, if it does you need to shim that movement out. Standard clearance is 0.1mm so if you can feel any more than a midges then you need to shim it. It helps with clutch play and action when it done and also quietens down the clutch on tick over. That's why the noise goes when you pull the clutch in, it's this gap you've eliminated by pulling in the clutch.
-
Yes please ken
-
Pm sent mate
-
yes please Ken
Simon
-
3 sold, I'll wait a week and organise the sales to see how many others want them.
Unless of course you need them sooner.
-
Hi Ken
Could I purchase a set of these shims from you if you have a set left please.
Best Regards
Nigel
-
Me too if still available.
-
5 sets sold. I'll contact you all in a few days to organise it.
-
Hi Ken
Great thank you NP 👍
Regards
Nige
-
Hi Ken
I better have a set please
Thanks
Phil
-
Can I have a set please
-
Just realised i still have 4 to build so a set for me please Ken
-
Looks like 8 sets sold. I'll wait a couple of days to see if the last set sells and keep a set for myself.
-
I’ll take a set Ken please.
-
Ok, well they are all bagged up in sets.
Please make payment to PimlottKen@GMail.com and make sure you include your postal address please.
I'd appreciate it being sent Family And Friends if you can.
-
Got a payment from John Wood but no postal address. Please PM me with it so I can send you the shims.
-
Ken
I've just paid and with F&F I don't think you have the option of adding an address .. or I mised it :)
I've Pm'ed you with it
Simon
-
Hi Ken
I have sent you a email about payment, Sorry I don't know how to do payment via your request .
Regards
Nigel
-
PM sent Ken.
-
£12 sent via F&F Ken.
-
I have payments and addresses now for 7 sets and Nigel is organising something else. I have Bryan, Roo, Mick, Simon, John and already sent Phil from Scunny and Phil from Wigan. I think that leaves just 3scs.
For information only, Friends and Family is a selection you make just after you chose who you're sending money too and how much, address can be added in the notes for seller section on the last page IIRC, just before you press send.
They are now all sold, even my set was sold to a friend.
However if anyone else is desperate I can get some more, don't really want to but I'd sooner do that than let someone down.
-
I am not and have never lived in ‘scunny’. I’m from the right side of the tracks in York, North Yorkshire 😀
I did however once spend 5 nights in Scunthorpe hospital post motorcycle/car ‘incident’. My neurosurgeon called me to ask how I was. The ‘on call’ A&E Junior houseman had called him to enquire about the instrumented fusion appearing on my X-ray(C5/C6) I’d collected in 2000. Satisfied his fine work had not been impaired, he enquired as to my whereabouts. On revealing my location as being Scunthorpe Hospital he wished me “…the very best of luck’ in such a way as to suggest I might be at risk in their care!!
-
Bout right for Sunny Scunny,
Blimey Ken, Scunthorpe, how very dare you? ;D ;D
-
Incidentally, but importantly, the care I received was 1st class and the outcome was just fine. I salute you Scunthorpe Hospital.
-
Turn coat!
Thought we were picking on Scunthorpe? ::) ;) ;D
-
We are, just not the hospital….😀
-
Payment sent Ken couldn’t see the bit where you add a message in p p so sent pm
-
Sorry 3scs, got the payment but no PM with an address.
Sorry Phil, it's Nigel that's in Scunny, you are of course in upmarket York. My deepest apologies.
-
Sorry 3scs, got the payment but no PM with an address.
Sorry Phil, it's Nigel that's in Scunny, you are of course in upmarket York. My deepest apologies.
Mickwinf is in Scunny 😁😁😁😁
-
DOH, yep course he is, going senile I think.
-
Resent address
-
Hi Ken
I have sent payment via bank VAC for you hopefully you got it ok ? Where not in Scunny ......... where sunny Northallerton 8). outskirts of posh up market York 😄
Nigel
-
I am confused now, who am i and where do i live?!
-
Oh good it's Mick who'd going senile.
All done, all 10 envelopes done, 8 posted tomorrow and 2 already in the post.
I'll let you know when I check my bank account Nigel, I don't check it everyday but it doesn't matter, yours is in the post.
-
Hi Ken
Thank you 👍
-
Cheers Ken.
-
Thanks Ken
-
Shims received thanks Ken
-
:and mine thanks
-
still bloody waiting! ;) :D
-
Mines arrived. Thanks Ken.
-
Mine arrived today thanks Ken. I used the thickest one on Lazarus and now spot on.
-
Hey, Roo. Yours are in scunny😂
-
FFS I make 1 mistake and I'll never live it down :'( :'( :'( :'(
Your's was heavier Roo as I took a dump in the envelope before I sent it ;D ;D ;D
-
Aaaaahhh, that explains it then, I've a bag o shite coming............Nice, cheers mate ;D ;D
-
Mine have arrived too Ken - many thanks
-
Shims arrived in post today. Thanks Ken.
-
No note from Roo to say they've arrived. Maybe his postie doesn't like him :) :)
-
I heard some big lads from Scunthorpe were looking for him..🫣
-
Mine arrived Ken - many thanks
Simon
-
posted on my 550 started thread by mistake....
I was enquiring if this was from Ken as I'm not expecting parts from anybody else and it was small. I crossed out my address just coz its apublic forum and all that and obviously in case any girls were looking..........dont want hoards of ladies banging on the door ;)
Anyway, is this from you mate as it came ripped open with nothing in it!
If you send me some dims, I'llge some from somewhere or otjer mate, might be able to get them in the states. Told you I had great luck! ???
pics coming, from phone, ang on!
-
(https://uploads.tapatalk-cdn.com/20220905/73bcde69124f12efbe09cc31389f047c.jpg)
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20220905/b400809a452b91c2d28dad4329e880c1.jpg)
Sent from my iPhone using Tapatalk
-
Yes that's my envelope Roo.
WTF has happened to that?
That's got to be deliberate.
When I get some more I'll replace them for you.
I do have some 0.1 and one 0.5 shims.
-
Just thought, maybe they ripped it open due to the smell coming from it (re my previous post ;D ;D )
Seriously, just ordered enough shims for 10 more sets, I'll make a new set for you Roo as soon as they arrive.
Just to confirm, Bryan, 2 x Phil, John, 3scs, Mick, Simon have all confirmed arrival. Roo's went missing so that's 8. I sent 10 and the other has confirmed arrival so that just leaves Nigel I think, did they arrive Nigel? just so I know.
-
Do you have any of the new sets available? If you do could I put my name against one set please?
-
I'll post when they are done, only just ordered them so it will be a few days before they arrive and then it's a long fiddly job to modify them to fit, so probably by the the weekend I'll have them finished.
-
Hi Ken, thanks for the response, do you want payment now or when they they are ready to send? I will PM you my address.
-
I'll advise when they are done in case anyone else needs a set. The rest will go on Ebay I think along with my new batch of felt washers.
-
Meant to check out my spare engines (have a 500 and a 550) for these but kept forgetting, then went on holiday and forgot again!
Found I have used all the shims up on the bikes I have going now, so would also appreciate a set if/when they are available. Hope I'm not to late (again)!!
-
I'll let you know when they arrive, postal strike is causing some problems.
-
Hi Ken
Sorry for the slow reply my shims arrived ok thank you very much I take it you got VAX payment ok ? 😊
Best Regards
Nigel
-
Not checked Nigel, I suppose so but who bothers over a little money. If it was a £1000 I'd have been online straight away ;D ;D
-
I'll let you know when they arrive, postal strike is causing some problems.
After the recent sad news they have regained one day as the Friday strike was called off and lost a day on the 19th BH.
Thanks, Phil
-
Shims arrived today.
Just need to alter them so they fit and I'll let you know.
-
I think I had better have a set of clutch shims for my 500 please Ken for when I take out the engine.
I don't think I can PM you from past experience.
-
I've fixed that now Ted.
I'll let you know when they are ready.
-
Ken, I assume no set left, all sold?
-
No Erny still got around 5 sets left.
Got round to altering the shims today, did the 0.5 shims which are the hardest to do, will finish the others off tomorrow.
I think this is my last lot, altering them is hard work tbh, it’s one job even my legendary patience gives up on.
-
Shims are now done, all bagged up and ready to be sent.
If I do any more I'm bunging them on Ebay at £20 a set. The effort required doesn't justify the amount I make on these.
PM me for PayPal address and include your postal address if you want some. Erny, I'd need to see how much extra it would be to send to the EU, hope that's ok. Shouldn't be too much more I reckon.
-
Another senior moment... well several.
Haven't used paypal for a while and spent an hour working out the pw. Then I find that the only account linked to it I closed six months ago. So have to register new debit card at least I suppose. I'll work it out.
Less work than you have done in getting these done I'm sure, so it's much appreciated.
Phil
-
Paid (hopefully) and sent a PM.
-
Got it, will be in the post Tuesday due to bank holiday, cheers.
-
Got it yesterday. Cheers Ken
Phil
-
Received mine today ken.
Many thanks.
-
Bit late, but that's the Post Office for you. At least they arrived, unlike Roos.
-
::) :D
Bit late, but that's the Post Office for you. At least they arrived, unlike Roos.
-
Still got some left.
-
still go some shims left Oddjob?
-
Yep, as many as you need.
-
brill ill measure up at the weekend, how much are they mate?
-
£12 inc P&P. That's for a set of shims, all you'll most likely ever need.
The set consists of 2 x 0.1mm, 1 x 0.2mm and 1 x 0.5mm.